Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterLock Repair in Houston, TX
Gate lock repair in Houston typically runs between $85 and $260 depending on whether you’re dealing with a misaligned latch, a failing keypad, or a lock that needs full replacement. Most repairs are finished in a single visit. If your gate won’t stay closed, the lock won’t turn, or the keypad stopped accepting your code, call Carver Gate Repair Houston at (361) 320-7104 and we’ll get a technician out to look at it.
Lock repair is the part of Gate Repair in Houston that homeowners tend to put off longest. A gate that still opens and closes feels like it’s working, even when the lock has failed. But a gate that doesn’t lock isn’t a gate. It’s an opening. Carver’s technicians handle lock repair as its own job, not an afterthought to a motor replacement, because a gate that can’t be secured is a gate that isn’t finished.
We work on mechanical locks, solenoid locks, maglocks, and the integrated locking arms built into LiftMaster, FAAC, and Linear swing operators. Our techs carry the common lock bodies, strikes, and latch hardware on the truck, so the majority of repairs are done in one trip.
Key Takeaways
- Lock repair in Houston costs $85 to $260 in most cases; full lock replacement runs higher.
- Most lock repairs are completed in a single visit.
- Every repair carries a written guarantee, good for a full year.
- You get a written price before any work begins. That number doesn’t move at the door.
When You Need Lock Repair
Some failures are obvious. Some aren’t, until the gate swings open at 2 a.m. Here’s what we see most often across Houston:
- The lock won’t engage when the gate closes. The gate shuts, the motor stops, but the lock never throws. That’s often a misaligned strike plate or a failing solenoid, and it’s common on heavy iron gates in older neighborhoods like Timbergrove and Glenbrook Valley where gates have settled over the years.
- The keypad accepts the code but the lock won’t release. The keypad works. The lock doesn’t. That usually points to a dead solenoid or a broken wire inside the operator arm, not a keypad problem. Swapping the keypad won’t fix it.
- Your key turns but the cylinder feels gritty or frozen. Houston humidity gets into lock cylinders and corrodes the pins. Locks that sit in full sun and rain, especially on west-facing gates in the Energy Corridor, build rust faster than you’d expect.
- Someone broke the lock or tried to force the gate. Forced entry bends the latch, breaks the strike, or destroys the cylinder. If the gate was visibly damaged, get the lock looked at before the motor starts fighting a bent latch and creates a bigger repair.
- The gate opens on its own when the wind pushes against it. If a closed gate drifts open without the motor running, the mechanical latch isn’t holding. That’s a security problem, and in areas near Braeswood and Westbury where lots back up to public access points, it’s one we’d fix promptly.
- The automatic lock stopped responding after a storm. Houston gets real storms, and power surges take out lock relays and control boards. If your lock quit after a bad Tuesday night thunderstorm, the cause is probably electrical.
Our Lock Repair Process
We work to The Garrison Standard, which means the process is the same whether you’re on the north side or down in Clear Lake. A written price before work starts. A written guarantee when the job’s done. Here’s the sequence:
- You call and a person answers. Not a voicemail tree. A live person, 24 hours a day, including weekends and holidays. You describe what the lock is doing, and we schedule a window that works.
- A background-checked, uniformed technician arrives. You’ll know who’s at your gate before they walk onto the property. The tech inspects the lock, the strike, the wiring, and the operator’s lock relay if it’s an automatic system.
- You get a written price, and you approve it before work starts. No verbal ballpark that grows. No “while we’re here” add-ons. The number is in writing, and it’s the number you pay.
- We repair or replace the lock, then test the full sequence. The tech cycles the gate open and closed multiple times, confirms the lock throws and releases cleanly, and verifies the keypad or intercom triggers it properly.
- We walk you through what was done and leave the site clean. No loose hardware, no wire clippings in the grass. You get the guarantee in writing before the tech leaves.
- If it fails inside a year, the second visit is free. That’s the 365-Day Done Right Promise. It’s in writing, and it’s not conditional on you finding the right person to talk to.
Lonnie Burke runs this location to the same standard. If a step doesn’t happen the way it’s written here, call him and he’ll make it right.
Lock Repair Pricing in Houston
Here’s what you can expect to pay for classic lock repairs in Houston. These are the real numbers, not a teaser to get you on the phone:
- Latch or strike realignment: $85 to $140. The cheapest repair when the lock still works but the alignment drifted.
- Lock cylinder replacement: $110 to $180. Common after storms, attempted break-ins, or years of humidity exposure.
- Solenoid or maglock replacement on an automatic gate: $145 to $260. This covers the lock unit, wiring check, and re-testing with your keypad and operator.
- Full lock replacement with new keypad integration: $175 to $340. When the lock body is worn out or the strike is too bent to serve, and the new unit has to talk to an existing keypad or intercom.
What moves the price: how the lock receives power, if the wiring runs through a swing arm or a sliding gate track, and whether the operator is a LiftMaster, FAAC, BFT, or Linear unit with its own lock output. Some operators handle automatic gate lock control directly; others need a separate relay. The inspection finds that before the price is written.
The estimate is free. Call (361) 320-7104 and a real person will get you scheduled.
FAQs – Lock Repair
How much does gate lock repair cost in Houston?
Gate lock repair in Houston runs $85 to $260 for typical repairs, and full lock replacement with keypad integration can reach $340. You’ll receive a written price before any work starts, so the cost is fixed, not an estimate that drifts. Call (361) 320-7104 for a free inspection and exact quote.
Is it cheaper to repair a gate lock or replace it?
A repair is cheaper whenever the core components are still serviceable: realignment ($85 to $140) beats replacement every time. If the cylinder is seized, the solenoid is dead, or the housing is cracked, replacement is the honest call and usually the cheaper long-term fix, because patching a dead lock only delays the second service call. Our techs will show you the condition before quoting either path.
Can you fix a gate lock the same day?
In most cases, yes. We carry lock bodies, strikes, latch hardware, and solenoids on the truck, so a Houston technician can usually complete the repair in a single visit. If your lock fails and you need it secured now, call (361) 320-7104 anytime. A live person picks up.
What brands of automatic gate locks do you service?
We service locks integrated with LiftMaster, FAAC, BFT, and Linear operators, along with standalone solenoid and electric gate maglock systems. The technician will match the repair to the system already installed at your gate, not push a replacement brand. That keeps the lock, keypad, and operator working as one system instead of three parts that don’t communicate.
Do you charge extra for emergency lock repair on nights or weekends?
No. The repair rate is the same whether you call at noon on a Wednesday or 2 a.m. on a Sunday. The guarantee is also the same: eleven months and 30 days later, if it fails, the second visit is free. The number never changes depending on when you call: (361) 320-7104.
Why Houston Homeowners Use Carver for Gate Locks
Most weld & rust repair gate lock failures in Houston are ignored until they become emergencies. The latch gets loose in March, the keypad gets glitchy in June, and by September the gate doesn’t lock at all. We’d rather fix the loose latch in March. That’s why our pricing and process are built for the normal repair, not the escalated one.
Carver Gate Repair Houston is part of the Garrison Partners family, operating to The Garrison Standard since 2008. That standard is why we put the guarantee in writing, why we background-check every technician, and why the phone rings six times before a person picks up, not a voicemail.
If your gate lock is acting up, even if it still locks most of the time, get it looked at before it becomes a full replacement. Call (361) 320-7104 and tell us what the lock is doing. We’ll send a technician who knows what to do about it.
Written by Lonnie Burke, Owner at Carver Gate Repair Houston, serving Houston.