Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in Houston, TX
Automatic gate repair in Houston typically costs between $175 and $650 depending on the operator type, the part that failed, and how quickly you need service. Most repairs on swing and slide operators can be completed in one visit, and Carver Gate Repair Houston dispatches background-checked, uniformed technicians who arrive with a written price before any work starts. If you’re dealing with a gate that won’t open, grinds when it moves, or reverses halfway through its cycle, call (361) 320-7104 and a live person will answer, day or night.
This page covers automatic gate repair specifically: electric gate operators, control boards, limit switches, loop detectors, articulating arms, and the safety sensors that keep a powered gate from closing on a car or person. It’s a focused sub-service under our broader Gate Repair in Houston work, and it follows the same Garrison Standard we’ve applied to every job since 2008: written pricing, written guarantees, and technicians who clean up after themselves.
When You Need Automatic Gate Repair
Automatic gate failures rarely announce themselves politely. You’ll see one or more of these symptoms, and the sooner you act, the less damage the operator sustains. Here’s what we see most often across Houston, from Kingwood to Sugar Land to Katy:
- The gate won’t open or close at all. A dead operator usually points to a failed control board, a blown capacitor, or a transformer that’s no longer sending power. In Houston’s summer heat, capacitor failures are routine after a few hard years.
- The gate starts then reverses immediately. This is often a limit switch problem or an obstruction signal from the safety sensors. On slide gates in neighborhoods like River Oaks and Memorial, we regularly find debris packed into the track triggering false obstructions.
- The gate moves slowly or grinds. Worn drive belts, failing gears, or low hydraulic fluid (on hydraulic operators like some FAAC and BFT models) will all slow a gate down. Let it go and the motor burns out.
- The gate opens by itself. That’s a loop detector misread or a failing control board sending phantom signals. It’s also a security problem, because an automatic gate that opens on its own is an open invitation.
- The remote or keypad stopped working. Sometimes it’s a dead battery or a fried receiver board. Other times it’s a photo eye misalignment. A technician can isolate this in minutes with a multimeter.
- The gate slams or jerks when it reaches the end of travel. Missed limit switches mean the motor doesn’t know when to stop. That shock loads the chain, the track, and the operator frame, and it shortens the life of everything attached to it.
If any of that sounds familiar, start with a phone call to (361) 320-7104. A live person answers, asks about your gate and your location in Houston, and schedules a technician for a window that works for you. You won’t get a voicemail box.
Our Automatic Gate Repair Process
We don’t show up and “take a look.” We show up with a process, and the process is the same whether you’re in a gated community in Clear Lake or a private driveway gate in The Heights. Here’s how a typical Gate Repair services call runs with Carver Gate Repair Houston:
- You call, a person answers. Our phones are staffed by a live person 24 hours a day, every day of the year, including holidays. You describe the symptom, we ask targeted questions about the operator brand and gate type, and we book a window that fits your schedule.
- A background-checked, uniformed technician arrives. You’ll know who’s at the gate. Our technicians carry identification and arrive in uniform. No surprises at the door.
- We diagnose the operator, track, and safety systems. We test the control board, limit switches, loop detector, photo eyes, and the mechanical components that move the gate. We don’t guess and we don’t start replacing parts until the failing component is identified.
- We hand you a written price before any work starts. The number on that paper is the number you pay. No escalation once the gate is open. If the repair requires a part we don’t have on the truck, we tell you before we start and include the part cost in the written price.
- We fix it and test it through full cycles. We run the gate open and close multiple times, check the limit switch travel, verify safety sensor response, and confirm the remote and keypad are working before we pack up.
- We hand you a written guarantee and leave the site clean. Every repair is backed by our 365-Day Done Right Promise, in writing. If the same repair fails inside a year, we return and fix it free of charge. No argument.
That process is the Garrison Standard. It’s what our home page explains in more detail, and it’s the same standard our technicians work to on every automatic gate job in Houston.
Automatic Gate Repair Pricing in Houston
Here’s what Electric Gate Repair typically costs in the Houston metro, based on the work we do most often. These are ranges, not quotes. Your exact price depends on your operator brand, the age of the system, and the complexity of the repair.
- Limit switch replacement: $175 to $320
- Photo eye or safety sensor replacement: $140 to $260
- Control board replacement: $325 to $650
- Capacitor replacement: $120 to $220
- Loop detector replacement: $200 to $380
- Drive belt or chain replacement: $190 to $340
- Remote or receiver repair: $95 to $220
- Full operator replacement (parts and labor): $900 to $2,200, depending on operator type and brand
What drives the price up or down? Three things. First, the brand. LiftMaster and Linear operators are common and parts are widely available in Houston, which keeps costs on the lower end. FAAC and BFT operators, especially hydraulic models, cost more for parts and take longer to repair. Second, the gate’s size and weight. A 20-foot iron swing gate puts more stress on the operator than a 12-foot aluminum gate, so failures tend to cascade. Third, access and condition. If the operator housing is rusted shut or the wiring has been patched repeatedly by previous handymen, we’re fixing more than one thing.
You’ll always get a written price before work begins, and the estimate itself is free. Call (361) 320-7104 and tell us what your gate is doing. We’ll give you a realistic range over the phone and send a technician to confirm it on site.
Automatic Gate Brands We Repair
Carver Gate Repair Houston technicians work on nine gate-motor brands, so we match the right parts and the right know-how to the system that’s already mounted on your property. The brands we see most often in Houston are:
- LiftMaster: Common on residential swing and slide gates in Houston’s newer developments. Control board and limit switch failures are the top call drivers.
- FAAC: Popular in upscale communities and commercial entrances. Hydraulic FAAC operators need specific fluid and seal knowledge, and we train on them specifically.
- BFT: Frequently installed in Houston townhome and mid-rise communities. BFT control boards are sensitive to power surges, which we see often during Gulf Coast thunderstorm season.
- Linear: A workhorse brand on older Houston properties. Linear operators are reliable but the capacitor and limit switch on 10-plus-year-old units are usually what fails first.
We also service Ghost Controls, Viking, DoorKing, Elite, and Mighty Mule equipment. The point is this: we don’t show up and learn on your gate. We arrive already knowing how your operator’s control board, limit logic, and safety circuit work.
Why Houston Homeowners Choose Carver Gate Repair
Most homeowners call us after someone else has already failed them. The previous technician no-showed, or quoted one number and charged another at the door, or left grease and wire clippings all over the driveway. That’s the pattern we built this company to break.
Here’s what we do differently, and it’s all in writing:
- Every repair is guaranteed for a full year. The 365-Day Done Right Promise is written on every job. If the same repair fails within that window, the second visit is free. No charge, no argument.
- The price you’re quoted is the price you pay. We hand you a written price before any work starts. The number doesn’t move.
- You know who’s at your gate. Background-checked, uniformed technicians. Every job. No mystery subcontractors.
- A person answers the phone, always. 24 hours a day, 7 days a week, including weekends and holidays. No voicemail queues.
Lonnie Burke runs Carver Gate Repair Houston with one rule: run every job to the Garrison Standard, every time. That means written prices, clean work sites, and repairs that stay fixed.
FAQs – Automatic Gate Repair
How much does automatic gate repair cost in Houston?
Automatic gate repair in Houston typically runs $175 to $650 for most electrical and mechanical repairs, with full operator replacement ranging $900 to $2,200. Simple fixes like a remote receiver or a photo eye land on the low end, while control board replacement and hydraulic operator work land on the high end. Call (361) 320-7104 for a written, free estimate based on your specific gate.
Can you repair my automatic gate the same day?
In most cases, yes. Our technicians work across the Houston metro daily and keep common LiftMaster, FAAC, BFT, and Linear parts stocked on the trucks, so many repairs are completed in a single visit. Call (361) 320-7104 early and we’ll tell you what’s realistic for your area.
Is it cheaper to repair or replace an automatic gate operator?
If the operator is less than 10 years old and the failure is a single component like a capacitor, limit switch, or control board, Gate Realignment or repair is almost always the better financial call, typically running $175 to $650. If the motor is burned out and the unit is past 12 to 15 years, replacement at $900 to $2,200 often makes more sense, especially given the humidity and heat exposure Houston operators endure year after year. Your technician will give you a straight recommendation with written pricing for both paths before any work begins.
Do you work on all automatic gate brands?
We repair nine major gate-motor brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we can match parts and service to the system already on your property. If your operator isn’t one of those, call and ask. We’ll tell you honestly whether we can service it.
Call Carver Gate Repair Houston
If your automatic gate is acting up, don’t wait until it’s stuck open at 11 p.m. or stuck closed when you’re late for work. Call (361) 320-7104. A live person answers, schedules your visit, and puts you on the calendar. You’ll get a background-checked technician, a written price before work begins, and a written guarantee on the repair that’s good for a full year. That’s how we’ve done it since 2008, and that’s how we’ll do it at your gate.
Written by Lonnie Burke, Owner at Carver Gate Repair Houston, serving Houston.