Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Houston Homeowners
A new Driveway Gate in Houston typically costs between $2,800 and $9,500 installed, depending on material, width, and whether you’re adding a motor. Most installations take one to two days on-site once fabrication is complete, and we handle everything from the first measurement to the final limit-switch adjustment. Carver Gate Repair Houston has been installing and servicing gates across the Houston metro since 2008, working to The Garrison Standard on every job.
We’re not a general contractor who does a few gates a year. Gates and gate motors are all we do. Lonnie Burke runs our Houston crew, and every technician who arrives at your property is background-checked, uniformed, and carrying a written price for the work before anything starts. That price does not move at the door. The guarantee on every job is in writing and covers a full year. If something isn’t right inside that window, we return and fix it free. Call (361) 320-7104 to schedule a measurement.
Automatic Gate Installation
Automatic Gate Installation means adding a motor, control board, and safety system so the gate opens and closes without you leaving the vehicle. In Houston, this typically runs $1,800 to $4,200 for the motor package on an existing gate, or more if wiring, conduits, and a new post are required. We match the operator to the gate’s weight and cycle frequency, then wire safety edges and a loop detector so the gate reverses instead of pinning a vehicle or person.
Operator Matching
A swing gate that weighs 600 pounds needs a different operator than a cantilever slide that weighs 2,000. We calculate gate weight during the measurement visit, then recommend a LiftMaster, FAAC, or BFT unit sized for daily cycles, not just opening force. Undersizing a motor is the most common cause of premature failure we see across Houston neighborhoods.
Control Package
Every automatic installation includes the control board, wireless receiver, and at least one safety edge or photo eye. We also handle the power run from your panel to the operator, which many homeowners don’t realize is not included in a bare motor price. The written quote covers conduit, wire gauge, and a dedicated breaker where needed.
Styles & brands we work with
Gate Installation Services
our Gate Installation in Houston covers the full scope from empty posts to a finished, operating gate: design, fabrication or ordering, post-setting, hinge or track hardware, operators, and final testing. A complete single-swing steel gate with a motor in Houston generally lands between $4,500 and $9,500. The number you’re quoted is the number you pay, because we deliver a written price before any work begins.
Replacement Work
Many Houston homes already have a failing gate, and the smart move is replacing it rather than patching rusted tubing or a sagging frame. We remove the old gate, inspect the posts for plumb and integrity, and reuse them only if they’re sound. Most replacements include new hinges, a fresh coat of primer, and re-hanging the existing opener if it’s still serviceable.
New Construction
For homes building a new driveway entrance, we prefer to be involved before the concrete is poured. That lets us place conduit for power and loop-detector leads cleanly under the drive, so you don’t end up with surface-mounted wire channels later. We coordinate with your builder and handle the full install once the driveway is ready.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric Gate Installation refers specifically to the powered portion of the job: wiring a gate operator, connecting safety devices, and programming remotes and keypads. On an existing gate, expect $1,800 to $3,800 for a complete LiftMaster or Linear package with two remotes, a keypad, and safety edges. The power run from the house is quoted separately when it’s more than a short distance.
Wiring Depth and Code
In Houston, direct-burial cable for gate operators should sit at least 18 inches deep, and we use conduit for every run we can. Clay-heavy soil in areas like Humble and Channelview shifts with moisture, and shallow cable gets nicked by lawn equipment fast. We don’t shortcut the trench.
Safety Circuits
A powered gate without working safety edges is a liability. Every electric install includes a reversing edge or photo eye on the closing edge, and we test the obstruction response before we hand you the remote. This is standard on our jobs, not an add-on you have to ask for.
Driveway Gate Installation
Pedestrian Gate installation is a related service, while Driveway Gate Installation is the complete job of putting a gate across a residential driveway, typically a swing or slide design. For a steel single-swing gate across a standard 12-foot drive, Houston pricing usually falls between $3,500 and $6,500, with a motor bringing the total toward the higher end of that range. We measure the drive’s width and slope, then build or order a gate that clears the ground correctly through the full arc.
Swing Configurations
Single-swing is the most economical and suits driveways up to about 14 feet. Beyond that, a double-swing or slide makes more sense, since one long leaf puts heavy stress on its hinges and takes longer to open. In neighborhoods like Deer Park and Cloverleaf, where lots run narrow but deep, we often recommend a slide to avoid swinging into the street or landscaping.
Ground Clearance and Slope
Houston drives vary from dead flat to noticeably crowned. A swing gate needs enough clearance at the latch end to clear a rising grade, and a slide gate needs a level track bed or a cantilever design that never touches the ground. We check both during measurement and adjust the hang height accordingly.
Sliding Gate Installation
Sliding Gate Installation is the better choice when the driveway slopes upward from the street or when there’s no room for a gate to swing into the property. Cantilever slide installations in Houston typically run $4,800 to $9,500 due to the heavier frame, rollers, and track hardware involved. The gate carries its own weight on rollers rather than dragging a wheel across the ground.
Cantilever vs. Track
A cantilever slide has no ground track to clog with Houston’s leaf litter and gravel, which makes it the lower-maintenance option for most homes. A V-track slide costs a bit less up front but needs a clean, level track bed and more frequent clearing. We’ll give you both numbers and let the site conditions drive the recommendation, not our margin.
Post and Foundation Work
Slide gates need substantial concrete footings for the support posts and the operator pad. We dig and pour those to depth, set the posts true, and let the concrete cure before hanging the gate. Rushing that step is how gates end up sagging within the first year, so we don’t rush it.
Gate Opener Installation
Gate Opener Installation is the process of mounting a motorized operator to a new or existing gate and bringing the system to full function. On a gate that’s already in place, the job usually runs $1,800 to $3,800, including programming and two remotes. The brand matters here: we install and service LiftMaster, FAAC, BFT, and Linear, and we’ll recommend whichever matches the gate type and your expected daily use.
Retrofit Work
When a gate works fine but you’re tired of opening it by hand, a retrofit opener is the most cost-effective path. We check the gate’s hinge points and weight first, because a heavy gate with worn hinges will destroy a new operator quickly. If the gate needs adjustment, we say so before the motor goes on.
Accessories and Programming
The base install includes two handheld remotes and a wired keypad at the gate. We can also add a wireless keypad at the house, a vehicle loop detector that opens the gate automatically from inside, and an intercom or camera if you want to control entry from the kitchen. All programming is done on-site and tested with you present.
Gate Fabrication
Gate Fabrication is the building of a gate from raw steel to match your driveway’s exact measurements, rather than adjusting stock panels. Custom fabricated gates in Houston typically start around $2,200 for a simple single-swing and run upward of $6,000 for ornamental double designs. We build to the opening we measured, so there’s no shimming or oversized gaps.
Material and Finish
We fabricate primarily in steel, using 2-inch square tubing for the frame and your choice of pickets, horizontal slats, or a mix. Houston’s humidity and salt air demand a proper primer and a two-coat finish, which is how we do every gate regardless of what’s visible. Powder coating is available for homeowners who want the longest finish life.
Matching an Existing Fence
If you have a specific fence style or a neighbor’s gate you like, we can mirror it in fabrication. Send us a photo or have us look during the measurement visit. We’ll match the picket spacing, top profile, and finish color as closely as the materials allow.
Brands We Service
Our technicians are factory-trained on LiftMaster and Linear equipment, which covers the majority of residential swing and slide operators in the Houston area. We stock common LiftMaster control boards, remotes, and safety edges on our trucks, which means a board swap doesn’t turn into a two-week parts order. For Linear systems, we keep the standard actuators and receivers in inventory and can usually complete a repair or retrofit in a single visit.
For FAAC and BFT hydraulic and electromechanical operators, which are more common on heavier custom gates, we carry the necessary seals, solenoids, and limit-switch components or can have them from our distributor within a day in most Houston zip codes. Whether you have LiftMaster, FAAC, BFT, Linear, or any other make, we can match the replacement or upgrade to the system already installed.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate groans or binds mid-travel. This means hinge wear or a misaligned track is forcing the motor to work against extra resistance. Left alone, it burns out the operator, and the repair bill triples.
- The gate reverses for no reason. A photo eye or safety edge that’s failing will cause erratic reversal, and it’s usually an early sign of wiring corrosion. It also means the safety system isn’t dependable until it’s checked.
- You hear the motor run but the gate doesn’t move. A broken drive chain, stripped gear, or failed coupler gives this exact symptom. Continuing to press the remote damages the motor’s output shaft.
- The gate sags and scrapes the driveway. This points to a failing hinge weld or an under-built frame. In Houston’s heavy spring rains, a dragging gate also collects debris and accelerates frame rust.
- The keypad or remote works intermittently. Failing receiver boards often work when they’re cold and drop out as the afternoon heat builds, which is a classic pattern in Houston summers. A technician can confirm it in minutes rather than weeks.
Our Process, Step by Step
- 1
You call, we answer. A live person picks up at (361) 320-7104, any hour, any day. We take your address, the gate type you’re considering, and set a measurement window that works for you.
- 2
Measurement and site check. We measure the opening, check the driveway slope, and assess post integrity and available power. This visit is free and comes with a written price for the full job, not a range.
- 3
Fabrication or order. If we’re building the gate, it goes into fabrication with the exact dimensions from the measurement. If we’re ordering, the lead time is confirmed before you commit. Nothing is ordered on your dime without your approval.
- 4
Installation day. The crew arrives in uniform, sets posts or hangs the gate, mounts the operator, runs power, and wires all safety devices. We work clean and haul off the old gate and hardware.
- 5
Test, program, and walkthrough. We run the gate through full open-close cycles, set the limit switches, program your remotes and keypad, and walk the job with you. You get the written guarantee before we leave the driveway.
How Much Does Gate Installation Cost in Houston?
A typical manual single-swing steel gate across a 12-foot driveway in Houston runs $2,800 to $4,500 installed, and you can see full Gate Installation pricing ranges below. Add an automatic operator and the total lands between $4,800 and $7,500. A double-swing or cantilever slide with a motor and intercom pushes toward $8,000 to $9,500. These are the ranges you should expect from any licensed contractor doing steel work in the Houston market, and we’ll quote you an exact written number after measuring.
Three factors move the price most: material and design (simple picket steel versus ornamental or custom slats), the power run distance from your electrical panel to the gate, and whether existing posts can be reused. Permitting is generally not required for a residential gate on flat ground in most Houston-area municipalities, but if your HOA or city requires one, we’ll note it before work starts. To avoid overpaying, get a written price that includes the motor, safety edges, remotes, and the power run as line items, not vague “installation included” language. To avoid underpaying and ending up with a bare-bones job, ask what happens when the gate reverses into a car. If there’s no answer, keep looking. Call (361) 320-7104 for a free measurement and a written estimate with no obligation.
Our Service Area Near Houston
Carver Gate Repair Houston covers the full metro, including Pearland, Baytown, Humble, Richmond, Channelview, Deer Park, Cloverleaf, Stafford, Aldine, Jacinto City, and Mission Bend. Most measurement visits are scheduled within two to three business days, and repair calls in the city are often handled same-day. If you’re outside the immediate Houston loop, our Gate Installation in Houston team still covers you, and we coordinate scheduling to keep travel efficient.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Houston
Gate installation is the full process of measuring a driveway opening, building or ordering a gate to fit it, setting or verifying the posts, and hanging the gate so it operates correctly. It includes the hardware like hinges, rollers, and latches, and it may include a motorized operator if you want automation. The finished job is a gate that opens and closes smoothly without binding, sagging, or scraping.
A standard single-swing installation with a motor takes one day on-site once the gate is fabricated or delivered. Custom fabrication adds one to three weeks of lead time depending on the design and finish. The measurement visit is free and takes about 45 minutes, and you’ll have a written price at the end of it.
Manual gates run $2,800 to $4,500, automated single-swing systems run $4,800 to $7,500, and slide or double-swing designs run $8,000 to $9,500. The exact number depends on material, driveway width, power-run distance, and whether existing posts are reusable. Call (361) 320-7104 and we’ll come measure and give you a firm written price.
Yes, LiftMaster is one of the primary brands we install and repair, and we keep common liftmaster control boards, remotes, and safety edges on our trucks. The same applies to FAAC, BFT, and Linear. If your Houston home has a different brand, we can still service it, and we’ll tell you honestly whether it’s worth repairing or replacing.
For gate repairs and opener failures inside the Houston loop, we often can. For a new installation, we’ll schedule a measurement visit within two to three business days, since the job requires precise dimensions and a written quote before any work starts. The fastest way to find out is to call (361) 320-7104.
Every gate installation includes a written guarantee that covers the work for a full year from the date of service. If something fails inside that window, we come back and fix it at no charge. The guarantee is printed on the work order you receive before you pay, and it’s honored without argument.
Clear the area around the gate opening of vehicles, potted plants, and anything within four feet of the work zone, and make sure the power panel is accessible for the technician if you’re adding a motor. There’s nothing else you need to do, and we’ll note any site-specific needs during the free measurement visit. If you have a dog, secure it before the crew arrives.
Schedule Your Gate Installation Service in Houston Today
If you’re ready for a gate that fits your driveway, opens when it should, and comes with a written one-year guarantee, call Carver Gate Repair Houston at (361) 320-7104. The measurement visit is free, the price is written before work starts, and a real person answers the phone 24/7. We’re ready when you are.
Written by Lonnie Burke, Owner at Carver Gate Repair Houston, serving the Houston metro since 2008.