Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterElectric Gate Repair in Houston, TX
Electric gate repair in Houston typically costs $185 to $480 for most mechanical and electrical fixes, with motor replacement running $650 to $1,400 depending on the operator model. Most repairs are completed same-day when parts are on the truck, and Carver Gate Repair Houston answers the phone 24/7 at (361) 320-7104. If your gate won’t open, hums without moving, or reverses mid-cycle, this page explains exactly what’s wrong and what it will take to fix it with our Gate Repair services.
Houston’s heat, humidity, and occasional flooding create specific failure patterns in electric gate systems. We see swollen circuit boards from condensation, corroded limit switch contacts, and sun-baked capacitor failures more often here than anywhere else in Texas. Those aren’t generic problems, and fixing them properly takes a technician who works on electric gates every day, not a generalist who installs a garage door opener and calls it done.
Carver Gate Repair Houston operates under The Garrison Standard, which means a written price before work begins, a background-checked uniformed technician on site, and a written guarantee on every repair good for 365 days. We work exclusively on gates, swing operators, and slide motor systems across nine brands, including LiftMaster, FAAC, and BFT equipment found throughout Houston neighborhoods like River Oaks, The Woodlands, Sugar Land, and Katy. This is a specialized repair trade, and you’ll notice the difference when the technician already knows the error code on your control board before the truck is parked.
For an overview of the full scope of gate services we handle, see our Gate Repair in Houston page. If you’re dealing with a manual gate, a motor issue, or a full system replacement, that’s the place to start. This page focuses specifically on the electrical side of the equation: motors, boards, sensors, and wiring.
When You Need Electric Gate Repair
Electric gate failures rarely happen all at once. They usually start with a symptom and get worse over days or weeks. Here’s what we see most often across Houston:
- The gate won’t move at all. No click, no hum, nothing. Usually a dead capacitor, a tripped thermal overload, or a failed transformer on the control board. In Houston’s summer heat, we see thermal failures on poorly ventilated control boxes in neighborhoods with direct west-facing sun exposure.
- The gate hums but doesn’t open. The motor is getting power but the drive train isn’t engaging. Could be a stripped gear, a sheared pin on the drive shaft, or a failed starter capacitor. This is one of the most common calls we take from Memorial and Galleria area properties.
- The gate opens but won’t close, or closes but won’t open. Almost always a limit switch or photo-eye alignment issue. Houston’s expansive clay soil shifts control box mounts seasonally, knocking sensors out of alignment and causing intermittent false stops.
- The gate reverses after closing. A safety sensor is reading a false obstruction, or the reverse sensitivity is dialed too high. We resolve this without disabling safety features, which is the important part.
- The gate is stuck halfway and won’t respond to the remote or keypad. Control board lockout. Many boards lock after a voltage spike, and Houston’s frequent thunderstorms produce those spikes regularly.
- The remote or keypad stopped working, but the gate opens from the key switch. Receiver board failure or antenna corrosion, often accelerated by Houston’s humidity. We test the transmitter frequency and receiver board voltage before replacing anything.
If any of these sound familiar, call (361) 320-7104. We’ll ask a few diagnostic questions over the phone, tell you whether it’s safe to leave the gate in its current position, and schedule a technician. There’s no charge for the phone consultation and no charge for the site estimate.
Our Electric Gate Repair Process
We follow a fixed process on every electric gate repair in Houston. It’s not proprietary magic. It’s just disciplined trade work under The Garrison Code, and it produces a gate that stays fixed.
- Phone diagnosis. When you call (361) 320-7104, a live person answers, every time, 24/7. We ask about the symptom, the gate type, the operator brand if you know it, and whether the gate is currently blocking access or stuck open.
- On-site inspection. A background-checked, uniformed technician arrives at the scheduled window, on the day we committed to. No reschedules, no “traffic was bad.” The tech checks the motor, control board, limit switches, photo eyes, loop detector, and wiring, then opens the unit and tests voltage and continuity before recommending any repair.
- Written price, delivered before work starts. This is the Garrison Standard, and it’s non-negotiable for us. The number is on paper, in your hand, before a single part gets replaced. If we’re not confident in the diagnosis, we don’t start guessing with your money.
- Repair with the right parts. We carry common parts for LiftMaster, FAAC, BFT, and Linear operators on the truck. If your part needs to be ordered, we tell you the ETA and schedule the follow-up before leaving.
- Full test cycle and clean site. The tech runs the gate through open-close cycles at least ten times, tests the safety reversal, and then cleans the work area. The only thing that leaves our truck is whatever we brought with us.
- Written guarantee. Every repair is backed by our 365-Day Done Right Promise. If the same repair fails within a year, we return and make it right at no charge. That’s in writing, every time.
Electric Gate Repair Pricing in Houston
Electric gate repair in Houston ranges from $185 to $480 for common fixes and $650 to $1,400 for operator replacement. For full pricing details, see How Much Does Gate Repair Cost? (2026 Price Guide) - Houston, TX. Here’s the breakdown by repair type:
- Capacitor replacement: $85 to $165. The part costs $20 to $40; the rest is labor and diagnosis. A bad capacitor is the most common fix for a gate that hums but won’t move.
- Limit switch replacement or adjustment: $120 to $220. Includes calibration and full cycle testing. Houston’s soil shifts make limit switch drift a seasonal issue for many swing gates.
- Photo eye / safety sensor repair or alignment: $95 to $185. If the sensor needs replacement, expect the higher end.
- Control board replacement: $350 to $750 depending on brand. LiftMaster boards run lower, BFT and FAAC boards run higher. We always verify whether the board can be rebuilt before recommending replacement.
- Motor replacement (swing or slide operator): $650 to $1,400. The spread depends on operator type, brand, and whether you choose a standard duty or heavy duty cycle motor. We’ll give you options with honest tradeoffs, not upsells.
- Loop detector replacement: $275 to $450. Includes cutting and sealing a new loop where the old one has failed, which happens in Houston when tree roots or driveway resurfacing kills the wire.
- Wiring repair or rerun: $150 to $400, depending on the run length and whether conduit needs replacement. Houston’s wet soil conditions accelerate wire jacket breakdown in underground runs.
Every estimate is free, and every price is written before work starts. You’ll never get a “that’s a little more than I quoted” phone call from us. The number on the written estimate is the number you pay, and if the repair fails within 365 days, the second visit is free. That’s the Garrison Standard, and it’s been operating since 2008.
Call (361) 320-7104 for a free estimate on your electric gate repair. We’ll tell you what the problem is, what it costs, and when we can be there, all from the first call.
FAQs – Electric Gate Repair
How much does electric gate repair cost in Houston?
Electric gate repair in Houston costs $185 to $480 for most component-level fixes and $650 to $1,400 for a full motor replacement. See How Much Does Gate Repair Cost in Houston, TX? (2026 Price Guide) for more. The specific price depends on your operator brand, whether the control board needs replacing, and whether we’re fixing a swing or slide gate. Call (361) 320-7104 for a free, written estimate before any work starts.
Can you fix an electric gate the same day in Houston?
Yes, in most cases. We keep common parts for LiftMaster, FAAC, BFT, and Linear operators on our trucks, so capacitor replacements, limit switch adjustments, sensor alignments, and many board swaps are completed the same visit. If your part requires ordering, we’ll give you the ETA and schedule the return trip before we leave. Call (361) 320-7104 and we’ll tell you the same-day picture for your specific issue.
Is it cheaper to repair or replace my electric gate motor?
Repairing is usually cheaper when the operator is under 8 to 10 years old and the failure is a single component: a capacitor, a limit switch, a sensor, or a board rebuild. Replacement becomes the smarter long-term move when the motor windings are shot, the gear train is worn, and the operator has been rebuilt before. We’ll walk you through the numbers both ways and recommend the fix we’d put on our own gate. Call (361) 320-7104 for a straight answer.
Why does my electric gate stop halfway in Houston’s humidity?
In Houston’s humidity, control boards, limit switches, and sensor connections can accumulate moisture, causing intermittent voltage drops and false limit readings that stop the gate mid-cycle. We see this across neighborhoods like Bellaire, West University, and Meyerland where morning condensation and high dew points are consistent. A trained technician can identify the exact component causing the stop and perform a Gate Realignment or replace it. Call (361) 320-7104 to schedule a diagnostic.
Written by Lonnie Burke, Owner at Carver Gate Repair Houston, serving Houston.