Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Aldine
Gate repair in Aldine usually means one of three things: a slide gate off its track from gravel and truck traffic, a sagging swing gate with rusted hinge posts on an older home, or a control board that got fried by a thunderstorm surge. Our crew handles all three. We dispatch background-checked, uniformed technicians to Aldine from our Houston office, and we answer the phone with a live person around the clock. Call (361) 320-7104 and you’ll get a written price before any work starts, not after the gate is apart.
Why Carver Gate Repair Houston Is Aldine’s Preferred Gate Repair Company
Carver Gate Repair Houston works to The Garrison Standard, the same operating code that’s governed our gate work since 2008. That means every Aldine customer gets a written price before the first wrench turns, a written guarantee on every repair good for a full year, and a free second visit if the repair fails inside that window. No charge. No argument. The Gate Repair team you see at your gate is background-checked and uniformed, because you should know exactly who you’re letting onto your property.
We know Aldine’s streets. The gravel drives off Aldine Mail Route. The older chain-link and ornamental gates on lots built in the 1960s through the 1990s. The warehouses and logistics yards with cantilever gates that take abuse from truck traffic every day. A technician who only works polished suburban driveways won’t spot the rack and pinion wear that’s about to strand a slide gate at a FM 525 property. We do, because we work these gates every week.
Our phones are staffed by a live person 24 hours a day, seven days a week, including holidays. You won’t get a voicemail box or a call-back queue when your gate is stuck open at 10 p.m.
Styles & brands we work with
Wrought Iron Gate Repair in Aldine
Wrought iron gate repair in Aldine is almost never about the ornamental panel itself. It’s about what that panel hangs on. On homes built from the 1960s through the 1990s, the hinge posts have spent thirty to sixty years soaking up Gulf Coast humidity and rain. The post rusts at the base, the gate sags, and the panel drags on the drive. Straightening the panel without addressing the post buys you maybe a summer, then you’re calling again.
A typical wrought iron gate repair in Aldine runs $180 to $380 for hinge work, post re-setting, and panel realignment. If the post is rusted through below grade, we cut it out, set a new steel post in concrete, and re-hang the gate square. That job usually lands between $350 and $650 depending on post size and what’s buried around it.
Hinge and post rebuilds
When a wrought iron gate sags, the hinge post is usually the culprit. We pull the gate, check the post for rust-through, and either reset it or replace it. The gate gets re-hung with new hinges and shimmed so it clears the drive by a consistent margin.
Weld and rust repair
Aldine’s humidity means surface rust is constant. Where the rust is structural, we weld in new sections or replace the component. We grind, prime, and paint the repair so it doesn’t flash rust in the next rain.
Metal Gate Repair in Aldine
Metal gate repair in Aldine covers the working gates that actually move: the chain-link swing gates on large residential lots, the ornamental steel driveway gates, and the heavy slide gates on commercial properties and warehouse yards. The failure mode here is different than in a neat suburban subdivision. Gravel, debris, and truck traffic work against the track and rollers every single day.
Basic metal gate repair in Aldine typically runs $150 to $300 for roller replacement, track cleaning, and alignment on a residential swing gate. Slide gate work costs more because the hardware is heavier: rack and pinion repairs run $250 to $550, and a full track reset with re-squared posts can reach $700 to $1,200 on a commercial cantilever gate.
Slide gate track and roller repair
Gravel and debris get packed into the rail, the rollers wear unevenly, and the gate starts jumping the track or binding mid-travel. We clean the rail, replace worn rollers, and reset the gate so it runs straight without fighting the motor.
Gate realignment and lock repair
A gate that’s drifted out of square won’t close against the latch without a shove. We re-square the frame, adjust the hinges, and repair or replace the lock so the gate actually secures the property.
Trusted Brands We Service in Aldine
Our technicians are trained on nine gate-motor brands, and in Aldine we see a lot of BFT, Viking, and Linear operators on both residential and commercial gates. We stock common parts for these brands locally, which means we’re not waiting on a distributor to ship a control board from out of state while your gate sits open. The right part matched to the right system is the difference between a repair that lasts a year and a repair that fails in a month. That’s the standard we hold.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Aldine Homes
- Slide gates off the track. Gravel kicked up by truck traffic along FM 525 and Aldine Mail Route packs into slide gate rails and chews up rack and pinion gears. The gate binds, jumps the track, or the motor strains until something gives.
- Sagging swing gates on older homes. Aldine has a lot of 1960s-1990s single-family homes with chain-link or ornamental metal driveway gates. The hinge post rusts at the base, the gate sags, and the panel drags. Patching the panel without fixing the post means a second call.
- Storm-surged control boards. Aldine’s frequent thunderstorms cause power surges that fry older gate opener control boards. Units installed before modern surge protection, especially on LiftMaster and FAAC systems, are the most common casualties.
- Worn operators on warehouse gates. The logistics and manufacturing base around Aldine means heavy-duty slide and cantilever gates cycle constantly. Limit switches wear out, loop detectors fail, and operators burn through capacitors faster than on a residential gate.
Pricing for Gate Repair in Aldine, TX
Here’s what you can expect to pay in this market. Hinge and post repair: $180-$380. Weld and rust repair: $150-$400. Slide gate track and roller work: $250-$550. Full swing gate realignment: $200-$450. Control board replacement with surge protection: $300-$700 depending on brand and whether the board is still manufactured. Gate motor replacement on a residential swing gate: $450-$900. Every Aldine customer gets a written price before any work starts, so the number you approve is the number you pay. Call (361) 320-7104 for a free estimate on your specific gate. We’ll quote it straight.
We Also Serve Cities Near Aldine
Most of our Aldine calls come through our Houston dispatch, but the crews cover the surrounding area too. If you’re in Houston, Pearland, Baytown, or Humble, the same Aldine standard applies: written price first, background-checked technician, full-year guarantee on every repair. One phone number, one standard.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Aldine
Straightening the panel alone won’t fix a sagging gate because the failure is almost always at the hinge post, not the panel. On Aldine homes built from the 1960s through the 1990s, the post has been rusting at the base for decades and the gate is hanging off a compromised anchor. We re-set or replace the post, re-hang the gate, and the sag is gone. A post repair with realignment in Aldine typically runs $180 to $380. Call (361) 320-7104 for an exact quote.
It’s common here, but it’s not something you should live with. Gravel and debris from truck traffic on Aldine Mail Route and FM 525 get kicked into the rail, pack down, and force the gate off its track or strip the rack teeth. We clean the rail, replace worn rollers or rack components, and reset the gate so it runs true. Slide gate track and rack repair in Aldine runs $250 to $550. Call (361) 320-7104 and we’ll get it running straight.
Most gate openers installed before the UL 325 standard was updated do not meet current safety requirements. That means no photo-eye sensors, no reversing edge, and no automatic stop when the gate hits an obstruction. We can retrofit photo-eyes, safety edges, and a current control board to many older BFT, Viking, and Linear operators. Retrofits run $300 to $700 depending on what the system needs. If the operator is too far gone, replacement is the cheaper long-term answer.
A power surge from a lightning strike or grid spike likely hit the board through the main supply line, and the unit had no surge protection. Aldine’s frequent thunderstorms make this a regular call for us. We see it most on LiftMaster and FAAC boards installed before modern surge protection was standard. The fix is a new board plus an inline surge protector so the next storm doesn’t do the same thing. Board replacement with surge protection runs $300 to $700 in Aldine. Call (361) 320-7104 for a free estimate.
We can often retrofit the existing gate, but it depends on the post condition and the operator. Many older chain-link swing gates on large Aldine lots have solid steel posts that just need new hinges, a modern operator with safety edges, and possibly a new latch. If the post is rusted through or the gate frame is too light for an automatic operator, replacing the gate panel and post is cheaper than forcing a retrofit that fights you. Retrofits run $350 to $800; a full replacement with a new operator lands between $900 and $1,800. We’ll tell you straight which way to go. Call (361) 320-7104.
Written by Lonnie Burke, Owner at Carver Gate Repair Houston, serving Aldine and surrounding communities.