Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor Repair Across Aldine
If your gate motor quit working in Aldine, the repair usually falls into one of three buckets: a fried control board, a worn gear or limit switch, or a gate that’s binding because the post or track has shifted over decades of Houston-area humidity. We dispatch our Gate Motor Repair technicians to Aldine throughout the week, and the phone is answered by a live person around the clock. Lonnie Burke runs our operation to The Garrison Standard, which means you get a written price before any work starts. Call (361) 320-7104 and tell us what the gate is doing, or not doing, and we’ll tell you what it will likely take to fix it.
Why Carver Gate Repair Houston Is Aldine’s Preferred Gate Motor Repair Company
Aldine homeowners call us because we work on gate motors the way a mechanic works on one make of car. We don’t split our attention between fences, concrete, and landscaping. Gate openers and the operators that drive them are what we do, every day. That focus matters when the fix is a 1990s FAAC board that needs a specific replacement part, not a guess. Our technicians are background-checked and uniformed, and they carry the parts for LiftMaster, FAAC, BFT, and Linear systems so most Aldine repairs don’t wait on a second trip.
We also understand what this part of Harris County throws at a gate. Aldine sits in a humid subtropical climate. Metal rusts faster here. Thunderstorms roll through and spike the power. Gravel from FM 525 and Aldine Mail Route drives ends up packed into slide gate tracks. Those aren’t abstract problems to us; they’re the calls we run every week. And because we operate to The Garrison Standard, every repair carries a written 365-Day Done Right Promise. If it fails inside that year, the second visit is free, no argument.
Styles & brands we work with
Gate Operator Keypad in Aldine
Gate Operator Keypad work in Aldine usually means one of three jobs: wiring a new keypad into an existing opener, replacing a keypad whose membrane buttons have sun-rotted after years of Texas heat, or reprogramming a keypad after a power surge wiped the access codes. On older systems, the keypad often can’t be added without a receiver upgrade. We’ll tell you that upfront. A straightforward keypad replacement in Aldine runs $180 to $320, including the part and labor. Adding keypad entry to a legacy operator without a receiver input typically runs $350 to $500, because the control board and radio receiver have to be matched to the existing motor.
Hardwired keypad installs and replacements
Older Aldine properties, especially homes built from the 1960s through the 1980s, often have hardwired keypads on a gooseneck post near the drive. Over time, the conduit fills with water and the wire corrodes inside. We pull new low-voltage wire in those situations rather than patching the old run. It costs a little more in labor but saves a callback.
Wireless keypad retrofits
When a homeowner wants keypad entry on a gate that never had one, we install a wireless keypad and receiver. On any of the major brands we service, this is a half-day job at most. The keypad gets weather-sealed against Aldine’s downpours, and we set the codes while you watch so you know exactly how it works before we leave.
Gate Operator Repair in Aldine
Gate Operator Repair in Aldine starts with a diagnostic call, not a sales pitch. The operator is the box that drives the arm or the slide track; when it fails, the gate either won’t move, moves halfway, or grinds and stops. Common fixes here include blown transformers, seized motor bearings from wet heat cycles, and limit switches that have slipped out of adjustment. A typical operator repair in Aldine runs $200 to $450, depending on what’s failed. If the operator is older than roughly 20 years, we’ll give you a straight comparison: the repair cost versus a replacement that carries a full-year written guarantee.
Control board and surge damage
Aldine’s thunderstorm season is hard on gate electronics. A nearby lightning strike doesn’t have to hit the gate directly; a surge on the power line is enough to fry a control board. If your opener quit right after a storm, that’s the first thing we check. We also recommend adding a surge protector to operators that don’t have one. It’s a $60 to $90 part, and it prevents a repeat of the same repair bill.
Mechanical wear on older operators
On Aldine swing gates from the 1970s through the 1990s, the operator often outlives its mounting hardware. We see gears stripped because the gate post sagged and the whole assembly started binding. The repair isn’t just swapping the gear; it’s re-hanging the gate so the new part doesn’t strip out the same way. That’s the difference between a patch and an actual fix.
Trusted Brands We Service in Aldine
Our Aldine trucks carry parts for LiftMaster, FAAC, BFT, and Linear operators, which covers the majority of systems we see on residential and light commercial gates in this area. LiftMaster is the most common on newer subdivision homes. FAAC and BFT show up often on older ornamental gates and import installations. Linear and DoorKing operators are common on commercial and warehouse slide gates, which Aldine has no shortage of given the logistics and manufacturing base along the 59 and Beltway 8 corridors. Matching the right part to the right board is half the job. The other half is knowing which of these older units can be kept alive with a spare part and which are better off replaced.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor Repair Problems We See in Aldine Homes
- Slide gates knocked off their tracks by gravel and debris: On unpaved drives along FM 525 and Aldine Mail Route, trucks kick gravel into the track channel. Rollers bind, then the gate jumps the rail. We clean the rack, reset the rollers, and add a track brush where it makes sense.
- Control boards fried by lightning surges: Aldine gets frequent, violent thunderstorms. Homes without surge protection lose opener boards more often than they should. We replace the board and install a surge suppressor so the same storm season doesn’t cost you twice.
- Sagging swing gates overworking the operator: Decades of humidity and rain rot the post footing, the gate drops, and the operator strains to move the weight. If it hasn’t burned out yet, re-hanging the gate can save the motor. If the operator has been grinding for months, it may need replacement.
- Worn keypads and access systems on rental conversions: Aldine has many single-family homes being converted to rentals or multi-family use. Owners want coded entry for tenants. We see a lot of old keypads with dead buttons and outdated intercoms that need modern access control.
Pricing for Gate Motor Repair in Aldine, TX
Most gate motor repairs in Aldine fall between $180 and $500. A keypad replacement runs $180 to $320. A limit switch or transformer replacement runs $200 to $350. A full operator replacement starts at $650 for a basic residential swing opener and climbs from there depending on the gate’s weight and length. Slide gate operator replacements on commercial and industrial properties are larger jobs that usually run $1,200 to $3,500 installed, and we quote those individually after measuring the gate. Every quote is written down before we start, and that number doesn’t move at the door. If you want an exact price for your gate, call (361) 320-7104 for a free estimate.
We Also Serve Cities Near Aldine
Carver Gate Repair sends technicians from the Houston metro office to Aldine and the surrounding Harris County communities. We handle gate motor work in Aldine as well as nearby Houston, Pearland, Baytown, and Humble. If you’re just outside Aldine, call and we’ll confirm the next available dispatch time for your area.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Aldine
In most cases, the gate itself can be saved. We rebuild the hinge post footing, re-hang the gate square, and replace the hinges if they’re seized. The motor is usually the casualty, not the cause. We’ll inspect it all and tell you what’s reusable. Re-hanging a sagging gate typically runs $400 to $800 depending on the post condition. Call (361) 320-7104 and we’ll give you a written price after we see it.
We install a track brush and a heavier roller set, and if the gate is light, we add a bottom guide to hold it on the rail. On gravel drives off FM 525 and Aldine Mail Route, we also set the gate travel slightly short of the loose gravel edge so the wheels aren’t plowing through debris. These are simple upgrades that prevent a repeat service call.
Almost always, the control board took a surge. Aldine’s storm season sends voltage spikes through the power lines, and older openers don’t have internal surge protection. We replace the board, test the transformer and motor, and install a surge suppressor on the power feed. That’s typically a $300 to $500 repair, but it’s the difference between fixing it once and fixing it again next month.
It may work, but it almost certainly doesn’t meet current UL 325 safety standards. Older operators lack the photocell and reversing-edge protection required today. We can retrofit many older units with safety sensors, and we do that as part of any repair on a legacy system. If the operator can’t be retrofitted cost-effectively, we’ll tell you and quote a replacement. Safety retrofits run $150 to $350 on top of the base repair.
Yes, on most LiftMaster, FAAC, BFT, and Linear systems. If the opener has a spare receiver input, we wire in a hardwired or wireless keypad and program your codes. If it’s an older unit without a receiver, we add a standalone receiver. Either way, the installed price is generally $180 to $320 for a basic keypad, or $350 to $500 if a receiver has to be matched and mounted. Call (361) 320-7104 and we’ll confirm what your system needs.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Aldine under The Garrison Standard.