Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Aldine, TX
Carver Gate Repair handles gate work across Aldine every week, and the calls here have a pattern. Most properties in Aldine were built between the 1960s and 1990s on generous lots, so we see a lot of aging ornamental metal driveway gates on single-family homes, plus a steady stream of slide gate failures at the commercial and warehouse properties along FM 525 and Aldine Mail Route. The humidity and heavy rain accelerate rust, and power surges from frequent thunderstorms knock out opener control boards more often than homeowners expect. Call (361) 320-7104 and a live person picks up, day or night.
Why Aldine Homes Are Different
Aldine’s housing stock follows a specific era. Homes built from the 1960s through 1990s dominate, and many still have their original chain-link or ornamental steel driveway gates. Those gates have now seen 30 to 60 years of Gulf Coast humidity, which means hinge welds brittle, post footings shift in the clay-heavy soil, and steel tubing rusts from the inside out. It’s not uncommon to find a gate that looks fine from the street but has rust perforation at the bottom rail where sprinkler overspray and pooled rainwater sit year-round.
Then there’s the commercial side. Aldine carries a dense mix of logistics and manufacturing buildings with heavy-duty sliding and cantilever gates. These gates run hundreds of cycles a week under truck traffic, and the most common failure we see is a slide gate jumped or dragged off its track by gravel and debris kicked up from unpaved drives along FM 525 and Aldine Mail Route. Automatic swing gates on older residential lots are another frequent job, especially as more properties change hands and get converted to rental or multi-family use. New owners inherit a gate that hasn’t been serviced in years and needs a full safety and operator inspection.
Styles & brands we work with
Our Main Aldine Services
Most Aldine calls fall into two buckets: a gate that will not open or close properly, and a motor or operator that stopped working. Every job starts with a written price before work begins, and every repair carries our one-year written guarantee.
Gate Repair in Aldine
Gate repair here usually means realigning a slide gate that trucks have knocked off its track, welding a cracked hinge on an older ornamental gate, or replacing rusted and seized rollers. Aldine’s soil shifts with wet-dry cycles, so post lean is common, and we check the post and footing, not just the gate leaf. If a gate is binding or dragging, the repair is mechanical, and we quote the full scope before touching anything. Read the full breakdown on our Gate Repair in Aldine page.
Gate Installation in Aldine
A new gate in Aldine needs to be matched to the lot and the use. We install ornamental steel and aluminum driveway gates on single-family properties, and heavy-duty slide and cantilever gates for the commercial and warehouse buildings that line the area’s industrial corridors. Aldine’s clay soil means post depth and concrete footing design matter more than people assume. Before any install we confirm measurements, operator location, and power access, then hand over a written price. Details live on the Gate Installation in Aldine page.
Gate Motor Repair in Aldine
Aldine’s thunderstorms are hard on gate electronics. We replace a striking number of control boards with surge damage, especially on older operators without dedicated surge protection. Beyond the board, motor repair here covers limit switches that have drifted out of adjustment, loop detectors that no longer sense vehicles or stop cycles properly, and swing operators with stripped articulating arms. Our technicians carry parts for the major brands and diagnose before quoting. What to expect is covered on the Gate Motor Repair in Aldine page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Aldine
Our technicians work on BFT, Linear, and Viking operators regularly in Aldine, alongside the other brands in our brands lineup. Matching the right part to the existing system matters more than brand loyalty. We stock common control boards, limit switches, and remote receivers locally so most motor repairs can be completed on the first visit.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Aldine, TX
| Service | Typical range in Aldine |
|---|---|
| Gate repair (minor realignment, hinge or roller replacement) | $150 – $400 |
| Heavy slide gate repair (re-track, jumped gate, post adjustment) | $400 – $900 |
| Gate opener control board replacement | $250 – $550 |
| Limit switch replacement and adjustment | $120 – $280 |
| Loop detector replacement | $180 – $350 |
| Swing gate operator replacement (residential) | $800 – $1,600 |
| Slide gate operator replacement | $1,000 – $2,200 |
| Full gate installation (single residential driveway gate) | $1,800 – $4,500 |
| Gate motor replacement (residential) | $700 – $1,500 |
| Service call and diagnostic | $79 – $149 |
Two things push Aldine prices toward the higher end of these ranges: heavy rust requiring frame repair or section replacement, and slide gates that have been repeatedly knocked off track and need structural realignment, not just a mechanical fix. Whatever the job, the number you approve before work starts is the number you pay.
Neighborhoods We Serve in Aldine
We cover the full Aldine area, from residential streets near Aldine High School to the industrial and warehouse corridors along Aldine Mail Route, FM 525, and the Hardy Toll Road frontage. Most residential repairs can be scheduled within a day or two, and commercial gate failures are prioritized because a stuck gate stops business.
- East Aldine
- Greenspoint area
- Northside
- Fairbanks
- Near Aldine Mail Route and FM 525 corridors
Service Area – Cities Near Aldine
In addition to Aldine, our crews serve surrounding Houston-area communities. If you’re in Houston, TX, Pearland, TX, Baytown, TX, or Humble, TX, the same written-price policy and one-year guarantee apply. Scheduling and dispatch run through our Houston office, and Aldine jobs are handled by local crews.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Aldine
Most Aldine residential repairs are scheduled within 24 to 48 hours. Commercial slide gate failures are treated as priorities because they block deliveries and employee access. We will give you a set arrival window when you call, and the phone is answered by a live person 24/7.
Permit requirements in unincorporated Harris County and Aldine depend on the property and the scope of work. For a like-for-like gate replacement with no new concrete footings, permits are often not required. If we are setting new posts or adding a powered operator, we will confirm what is needed before work starts.
Yes. Slide gates, cantilever gates, and heavy-duty operators on Aldine’s industrial properties are a major share of our work. We handle loop detectors, motor replacements, and slide gate re-tracking for commercial facilities, and we respond to commercial failures as a priority.
If your gate is off its track, your opener will not respond, or you want a written price for a new gate, call (361) 320-7104. You’ll speak to a live person, get a straight answer, and have a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aldine Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.