Hinge & Post Repair in Houston, TX

Wrought iron

Wood & steel frame

Farm & ranch

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Wood & steel frame03Farm & ranch04Sliding driveway gates05LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

Hinge & Post Repair in Houston, TX

Hinge and post repair in Houston typically runs between $185 and $650 depending on whether we’re rebuilding a weld, resetting a leaning post, or replacing a rotted steel footing. Most jobs we handle the same day we’re called, especially when a gate is dragging or no longer latches. If you’re dealing with a gate that sags, scrapes, or won’t close square, call Carver Gate Repair Houston at (361) 320-7104. This is a focused repair, not a full gate replacement, and it’s the kind of work we do every week across Houston.

We’re Carver Gate Repair Houston, part of the Garrison Partners family. Since 2008, every location has worked to The Garrison Standard: a written price before any work starts, a background-checked technician at your door, and a written guarantee on every repair, good for a full year. Lonnie Burke leads the Houston crew under that same standard. No vague promises. No price that moves once the job is open.

When You Need Hinge & Post Repair

Most homeowners don’t notice hinge wear until the gate starts misbehaving. Here’s what we see across Houston, from Kingwood to Katy to Pearland:

• The gate drags across the driveway. A worn hinge pin or a settled post drops the latch side of the gate, and the bottom edge starts scraping concrete. Left alone, it grinds the gate frame down.
• The gate leans toward the street or yard. Houston’s clay soil expands and contracts through wet and dry seasons, and that movement slowly pulls posts out of plumb. A gate that leaned two inches last year will lean four inches by next spring.
• The gate won’t latch or latch too hard. When hinges sag, the latch no longer lines up with the receiver on the post. You end up lifting the gate by hand just to close it.
• The post is loose at the base. Grab the post and rock it. If it moves, the concrete footing has cracked or the post base has corroded. In Houston’s humidity, steel posts rust where they meet concrete, especially near sprinkler heads.
• You hear grinding or squealing when the gate opens. Hinges without grease or with worn bushings put load on the gate motor, which shortens the motor’s life. A bad hinge left untreated becomes a motor replacement.
• A vehicle clipped the gate or post. Even a 5 mph bump from an SUV in a driveway can knock a post out of alignment or snap a hinge weld. We inspect for frame damage beyond the obvious hinge break.

Any one of these calls for hinge and post repair before the gate fails outright. The longer a leaning gate runs, the more it stresses the operator, the frame, and the opposite hinge set-issues our Weld & Rust Repair team also addresses.

Our Hinge & Post Repair Process

We keep this work disciplined. Every hinge and post repair in Houston follows the same sequence, whether it’s a driveway swing gate in Cypress or a pedestrian gate in Sugar Land:

1. Inspection and measurement. We check the gate’s plumb, level, and square, measure the hinge gaps, and rock the post to test the footing. We also check the gate motor’s limit switch and force settings, because a gate that drags makes the motor work harder than it should.
2. Written price, before work starts. We hand you a written price that covers the repair scope. That number does not change at the door or after the gate is opened up. This is The Garrison Standard, not an upsell tactic.
3. Post reset or replacement. If the post is loose, we’ll either reset it in a new concrete footing or weld a new steel post if the old one is corroded past saving. Houston’s soil means we spec footings deep enough to resist seasonal movement.
4. Hinge repair or replacement. Depending on the gate’s weight and hinge style, we’ll repair existing hinge barrels, replace worn pins and bushings, or weld new hinge assemblies. For welded steel gates, we grind, align, and re-weld with full penetration so the joint lasts.
5. Gate alignment and latch adjustment. We square the gate in the opening, adjust the latch receiver, and confirm the gate opens and closes without binding.
6. Cleanup and walkthrough. We clear our debris and walk the gate with you before we leave. Every repair includes a written guarantee, good for a full year from the date of service. If the same repair fails inside that window, we come back at no charge. That’s the 365-Day Done Right Promise.

Hinge & Post Repair Pricing in Houston

Here’s what hinge and post repair typically costs in the Houston market, based on the jobs we run most often:

• Hinge lubrication and adjustment: $85 – $150. This covers light surface rust removal, greasing or replacing hinge pins, and re-aligning the latch. It’s a maintenance-level fix for gates that still sit reasonably square.
• Single hinge replacement, welded steel gate: $185 – $350. We cut off the old hinge, grind the gate frame clean, and weld a new barrel hinge or strap hinge in place. Includes realignment.
• Post reset with new concrete footing: $300 – $550. We pull the post, dig a new footing, set the post, and reattach the gate. Cost depends on post size and whether we’re resetting one post or both.
• Full leaf rebuild (both hinges and post work): $450 – $650+. This is a heavier job for double-leaf driveway gates or long single-leaf gates where the entire hinge side of the opening has shifted. We price this on inspection.

What affects the final price: gate weight and length, whether the post needs full replacement or just a reset, the condition of the existing hinge brackets, and access to the work area. Gates with decorative cladding or brick columns cost more in labor because we protect and work around those surfaces.

We give you the written price before we touch the gate, and we don’t move it. If you’re weighing repair against Gate Repair or a full replacement, we’ll tell you honestly which makes sense for your gate’s age and condition. Call (361) 320-7104 for a free estimate.

FAQs – Hinge & Post Repair

How much does gate hinge and post repair cost in Houston?

Hinge and post repair in Houston typically costs $185 to $650, depending on the work involved. A simple hinge replacement or lubrication runs under $350, while a post reset with a new concrete footing averages $300 to $550. We provide a written price before any work begins, so the number doesn’t change after we start. Call (361) 320-7104 for a free estimate on your specific gate.

Can you repair a leaning gate post without replacing the whole gate?

In most cases, yes. We cut the post free, dig a new concrete footing, reset the post plumb, and reattach the gate to the repaired hinges. Your gate leaf, frame, and hardware are usually reused unless they’re damaged beyond safe repair. A leaning post doesn’t automatically mean a new gate.

How long does hinge and post repair take?

Most hinge and post repair jobs in Houston are completed in a single visit, usually two to four hours. Post resets that require a new footing may need one extra day for concrete to cure before the gate is reattached under load. We’ll give you a time window when you book, and the price you’re quoted doesn’t stretch because the job took longer.

Do you work on LiftMaster and other gate motors when you repair hinges?

Yes. Our technicians are trained on Automatic Gate Repair systems including LiftMaster, FAAC, BFT, and Linear operators, among others. Hinge and post alignment work often interacts with the motor’s limit switch and force settings, so we check the operator during the repair to make sure the gate runs smoothly and doesn’t fight the motor after we leave.

Is it cheaper to repair hinges or replace the gate?

For most gates, hinge and post repair at $185 to $650 is a fraction of a full gate replacement, which in Houston runs $1,800 to $6,000 or more depending on size and material. If your gate frame is structurally sound, repair is the right call. We’ll tell you if we see rot, rust-through, or collision damage that makes replacement the smarter long-term decision.

Why Houston Homeowners Call Carver for Hinge & Post Repair

The Garrison Code is simple: show up on time, price the work before you start, do the job right, and stand behind it in writing. We answer our own phones 24/7, so when you call at 7 a.m. on a Saturday because your gate is stuck half-open across your driveway, a live person picks up. Not a voicemail.

Every technician we send is background-checked and uniformed. You know who’s walking onto your property before they arrive. The price is written, the guarantee is written, and the work is backed for a full year. If the repair fails inside that year, we return and fix it free. No charge, no argument.

Most Houston-area gate builders and fence companies don’t specialize in gate hardware. We do. Hinge pins, post footings, barrel hinges, strap hinges, latch alignment, Lock Repair, limit switches, loop detectors: this is the work we do day in and day out.

If your gate sags, scrapes, or won’t close square, don’t wait for the post to fail completely. Call Carver Gate Repair Houston at (361) 320-7104 for a free estimate and a written price before any work begins.

Written by Lonnie Burke, Owner at Carver Gate Repair Houston, serving Houston.