Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mission Bend, TX
Carver Gate Repair handles gate work across Mission Bend, where 1970s – 1990s homes on larger lots mean aging driveway gates, retrofitted openers, and hardware that fights Houston humidity every day. Our crews work on nine gate-motor brands, quote a written price before any work starts, and stand behind every repair with a 365-day guarantee. If your Mission Bend gate is sagging, stuck, or the motor stopped responding, call (361) 320-7104 and a live person answers, 24/7.
Why Mission Bend Homes Are Different
Mission Bend sits in unincorporated Harris County, which shapes gate work here in two ways. First, there’s no municipal building department reviewing every modification, so homeowners often inherit gates and openers that were retrofitted over the years without permits. Second, because Harris County permitting is the only layer of oversight, crews need to know what the county actually enforces and what falls to the homeowner. Our technicians are familiar with the rural-suburban standards that apply to driveways, setbacks, and gate placement across Mission Bend, and we flag anything that could bite you later.
The housing stock compounds it. Many Mission Bend lots are generous, with long gravel or concrete driveways and double-swing gates that have been carrying dead weight for decades. Expansive clay soil is the real adversary here: it heaves and contracts with moisture, slowly pulling hinges out of alignment until a gate scrapes its arc or refuses to close. We preemptively brace sagging double-swing gates in Mission Bend rather than simply tightening a bolt and hoping for the best, because we know the soil will work against that bolt within a season.
Climate is the third variable. Houston’s humidity accelerates rust on gate frames, hinge plates, and motor housings. Heavy rain events push water into control boxes and loop detectors, and they can leave gates standing in saturated ground that shifts overnight. Any honest gate assessment in Mission Bend has to account for all three: the county rules, the clay, and the humidity.
Styles & brands we work with
Our Main Mission Bend Services
These three services cover what Mission Bend homeowners call us about most, and each has its own page with job details, local pricing, and answers to the common questions for that specific kind of work.
Gate Repair in Mission Bend
A gate repair in Mission Bend usually starts with a hinge or a weld that gave way, often on a double-swing gate whose posts have shifted in the clay. We inspect the full arc, check the post footings, and tell you plainly whether the frame is worth saving or the repair would only buy you a year. Written price comes first, and the repair carries the 365-day guarantee. Full details are on the Gate Repair in Mission Bend page.
Gate Installation in Mission Bend
A new gate on a Mission Bend property has to match the driveway width, the slope, and the soil that will try to move it. We measure on site, quote a written price for the gate, posts, hardware, and any operator you choose, and schedule the work so the driveway isn’t blocked longer than necessary. Because many installs here replace gates that were never permitted, we also check what Harris County expects before we dig. See Gate Installation in Mission Bend for the step-by-step and typical timelines.
Gate Motor Repair in Mission Bend
Humidity and rain are hard on gate motors in Mission Bend, especially boards and limit switches inside control boxes that were sealed years ago and forgotten. We diagnose the operator itself before recommending parts, so a misaligned sensor doesn’t get billed as a motor replacement. We service LiftMaster, FAAC, BFT, Linear, and five other brands, with a written price quoted before any parts go in. The Gate Motor Repair in Mission Bend page covers common failures, pricing, and same-day scheduling.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Mission Bend
Our technicians work on LiftMaster, FAAC, BFT, and Linear systems, among others, and we keep the most common replacement parts for those brands stocked on our trucks. That means a Mission Bend motor repair doesn’t stall on a part shipped from Dallas. Browse our brands for the full list of operators we cover.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Mission Bend, TX
| Service | Typical range in Mission Bend |
|---|---|
| Gate repair, minor (hinge tightening, latch adjustment) | $85 – $180 |
| Gate repair, moderate (weld, post realignment) | $180 – $340 |
| Gate motor repair (limit switch, control board) | $220 – $460 |
| Gate motor replacement (operator swap) | $850 – $1,900 |
| Double-swing gate installation | $2,800 – $6,500 |
| Gate opener installation, new system | $1,500 – $3,200 |
| Loop detector replacement | $350 – $750 |
| Remote or keypad programming | $65 – $140 |
| Service call / diagnostic visit | $45 – $90 |
What pushes a Mission Bend quote higher: a double-swing gate with posts already leaning in clay, rusted frames that need section replacement, or a motor that has to be rewired from the house side. Every quote is written down and agreed to before any work starts, so the number doesn’t move at the door.
Neighborhoods We Serve in Mission Bend
We run calls across Mission Bend throughout the week, and because our scheduling is coordinated through the Houston office, we can usually reach most Mission Bend addresses the same day for repair calls. Response times hold across the entire area.
- Mission Bend North
- Mission Bend South
- Barkers Crossing area
- Addicks Clodine corridor
- Alief-adjacent Mission Bend streets
Service Area – Cities Near Mission Bend
Beyond Mission Bend, our crews cover neighboring communities in the Houston metro. If you’re in Houston, TX, Pearland, TX, Baytown, TX, or Humble, TX, the same written-price and guarantee standard applies. Those pages cover local conditions for each city.
Serving Mission Bend, TX - Our Local Coverage Area
We’re based in the Mission Bend area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mission Bend
Most Mission Bend repair calls are reached the same day, and emergency calls are dispatched 24/7. Because scheduling runs through our Houston office, there’s no local phone blackout on weekends or holidays. Call (361) 320-7104 and a live person confirms your window.
Mission Bend is unincorporated Harris County, so there’s no city permit office, but county requirements can still apply to new installations, electrical runs, and setback changes. Our crews check what applies before starting any installation, and we’re familiar with what county inspectors will ask about.
Every repair carries a 365-day guarantee, in writing. If the repair fails inside a full year, we return and make it right at no charge, no argument. That’s The Garrison Standard, and it applies to every gate repair in Mission Bend.
If your gate is down, sagging, or making a sound it never made before, call (361) 320-7104 for a free estimate. A live person answers, every day, any hour, and the price you’re quoted is the price you’ll pay.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mission Bend Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.