Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Highlands, TX
Highlands, TX gate work has its own set of rules. The San Jacinto River shapes everything here: shifting clay soil, high humidity, flood-driven silt, and air that carries corrosion from nearby industrial sites. We’re the gate company Highlands homeowners call when a gate won’t open, a post has shifted out of square, or a motor fried after a storm. Our crews work on gates all over this area, from the riverfront streets east of Main to the ranch-style subdivisions further out. Call (361) 320-7104 and you’ll get a real person, not a voicemail box.
Why Highlands Homes Are Different
Most of the housing stock in Highlands dates to the 1960s through the 1980s: ranch-style homes on larger lots, many with chain-link or tubular steel driveway gates. A lot of those gates started life as manual swing gates, and somewhere along the line someone retrofitted an automatic opener onto a frame that was never meant to carry one. That combination is where we see most of the trouble: sagging hinges, misaligned tracks, openers that strain and burn out.
Then there’s the ground itself. The soil here is clay-rich, and when the San Jacinto rises, that soil drinks water and swells. Gate posts set without extra-long anchors shift, and a post moving half an inch throws the whole gate out of plane. After heavy rains, we regularly find gate hinges on riverfront streets packed with silt, and we carry extra-long anchor bolts specifically for posts set in sandy, waterlogged ground around Highlands. Add in the humidity and the corrosive air moving off the refineries, and steel gates here rust faster than they do ten miles inland. None of this is unusual to us; it’s the normal baseline for gate work in Highlands.
Styles & brands we work with
Our Main Highlands Services
Three jobs make up the vast majority of what Highlands homeowners call us for, and each one has its own page with pricing and detail.
Gate Repair in Highlands
A gate that drags, won’t latch, or hangs crooked is rarely one problem; it’s two or three acting together. In Highlands, the usual culprits are rusted hinges, posts that have settled in clay soil, and frames that were stretched by a retrofit opener. We square the frame, replace worn hardware, and reset posts where needed. Written price comes first, so there’s no surprise when the work is open. See Gate Repair in Highlands for the full breakdown and real price ranges.
Gate Installation in Highlands
A new gate in Highlands needs to be spec’d for what’s actually under it. That means concrete depth below the clay line, zinc-coated or powder-coated steel for the humidity and refinery air, and hinges sized for a gate that may sit in damp soil for months. We measure, quote a written price, and schedule the install; this isn’t next-day work, and anyone promising that is cutting a corner. Gate Installation in Highlands covers what a proper installation includes and what it costs.
Gate Motor Repair in Highlands
Motors in Highlands die for predictable reasons: moisture intrusion, power surges during storms, limit switches that wore out, or a gate that got heavier as rust and dirt built up. We diagnose before we quote, and the price you sign is the price you pay. Gate Motor Repair in Highlands lists the common failure points and typical repair costs for the brands we work on.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Highlands
Our techs work on the systems Highlands homeowners actually have: LiftMaster, FAAC, BFT, Linear, and others. We stock common parts for these brands in our service vehicles, which means most motor repairs on a LiftMaster or FAAC unit in Highlands finish in a single visit. For a full list of brands we service, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Highlands, TX
| Service | Typical range in Highlands |
|---|---|
| Gate repair, minor (hinges, latch, alignment) | $180 – $340 |
| Gate repair, major (post reset, frame straightening) | $400 – $850 |
| Gate motor repair | $220 – $480 |
| Gate motor replacement | $650 – $1,400 |
| Full gate installation, single swing | $1,800 – $4,200 |
| Full gate installation, double swing | $3,000 – $7,500 |
| Gate opener installation (motor, arms, controls) | $900 – $2,400 |
| Loop detector replacement | $200 – $400 |
| Limit switch replacement | $150 – $300 |
| Service call / diagnostic | $75 – $120 |
What pushes a Highlands quote to the top of those ranges is usually the post. Posts in clay soil that have shifted need to be dug out, reset, and re-concreted, and that adds labor. Corroded frames from the humidity and refinery air can also force more replacement than repair. Every price is in writing before any work starts, so the number you sign is the number on the invoice.
Neighborhoods We Serve in Highlands
We work everywhere in Highlands and we’re usually at the door within a few hours for repairs. These areas come up most often:
- Highlands Riverfront (east of Main, along the San Jacinto)
- Crosby-Lynchburg corridor
- Highlands East (near the refineries)
- Industrial drive gates along SH-330
- Highlands West subdivisions (off Battlebell Road)
Service Area – Cities Near Highlands
Beyond Highlands, our crews cover several nearby communities. We work in Channelview, TX along the ship channel, in Baytown, TX to the east, in Deer Park, TX to the south, and throughout Houston, TX itself. Scheduling runs through our Houston dispatch office, but the technicians who knock on Highlands doors know this area’s soil and weather. Call (361) 320-7104 to put us on a job.
Serving Highlands, TX - Our Local Coverage Area
We’re based in the Highlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highlands
Yes, in most cases. We staff live phone coverage 24/7, and for repair calls in Highlands, we typically arrive within a few hours. Installation and new-opener work is scheduled, not same-day, because it requires measurement and a written quote first. Call (361) 320-7104 and we’ll give you an honest arrival window.
For repairs and motor replacements, usually not. For a full new installation with new concrete footings, it depends on the specific property and any HOA rules. We handle the paperwork if a permit is needed, and we’ll tell you during the estimate, not after the job starts.
Every repair in Highlands carries a written guarantee, good for a full year from the date of service. If the repair fails inside that window, we come back and fix it at no charge. That guarantee is in writing on every repair we do, no exceptions.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highlands Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.