Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Houston?
Gate parts and welding in Houston typically cost between $125 and $1,500 per repair, with most homeowners paying $275 to $650 for a single service call that includes parts, labor, and on-site welding. Minor part replacements like gate hinges or latch hardware run $75 to $250, while structural welding repairs on steel or wrought iron gates run $200 to $700 depending on the extent of the damage. A full gate frame rebuild with custom fabrication and welding can reach $2,000 to $4,500.
We’re going to break down exactly what those numbers cover, what drives them up or down in the Houston market, and what you should expect to pay for specific jobs. No vague ranges that leave you guessing.
Key Takeaways:
- Most gate parts and welding jobs in Houston fall between $275 and $650 total.
- Emergency or same-day welding carries a premium of $75 to $150 in most cases.
- Houston’s humidity and clay soil mean rusted hinge posts and sagging gate frames are the two most common welding-related repairs we see.
- Written pricing before work starts is not standard in this trade. It should be.
Gate Parts & Welding Cost Breakdown (2026)
Here’s what Houston homeowners paid for common gate parts and welding work in 2025, and what the same work is running in 2026 based on current steel prices and labor rates in Harris, Fort Bend, and Montgomery counties.
| Job Type | Typical Cost Range (Houston, 2026) | What It Includes |
|---|---|---|
| Gate hinge replacement (pair) | $75 – $250 | Removal of worn hinges, welding new hinges, realignment |
| Latch and lock hardware replacement | $60 – $180 | New latch assembly, strike plate, fasteners |
| Sagging gate frame repair (welding) | $200 – $500 | Reinforcing the frame, welding corner gussets, rehanging |
| Broken weld repair (single location) | $150 – $400 | Grinding out the failed weld, re-welding, cleanup, paint touch-up |
| Post replacement (steel, set in concrete) | $400 – $900 | Removing old post, setting new post, concrete, welding gate back to post |
| Custom steel gate fabrication (single walk gate) | $800 – $2,500 | Design, steel, welding, primer, paint, installation |
| Custom driveway gate fabrication (double swing) | $3,000 – $8,000 | Full fabrication, welding, hinges, installation, primer, paint |
| Gate wheel or roller replacement | $100 – $300 | New wheel, bracket, mounting hardware |
| Wrought iron picket replacement (per picket) | $40 – $90 | Cutting out damaged picket, welding new one, paint |
| Full gate frame rebuild (existing gate, structural) | $1,200 – $4,500 | Stripping to frame, replacing compromised steel, re-welding, rehanging |
Those numbers are for Houston’s suburban and mid-metro market: Spring, Katy, Sugar Land, Pearland, Cypress, Tomball, Kingwood, and the neighborhoods inside the Loop where older wrought iron gate work from the 1970s and 1980s is now reaching end of life.
What drives the cost up
Emergency calls after 6 p.m. or on weekends, which usually add $75 to $150. Gates that were installed without proper reinforcement, so the frame itself has twisted beyond a simple hinge swap. Custom ornamental work where pickets, scrolls, or rings need to be hand-forged or matched to existing detailing. And any job that requires removing and resetting a post in concrete, which is labor-heavy and can’t be rushed.
What keeps the cost down
A gate that’s caught early, before a sagging hinge tears the frame or pulls the post out of plumb. A standard-sized steel walk gate rather than a custom footprint. Powder-coated steel that hasn’t started rusting through, so welding is contained to one small area. And a technician who carries common Houston gate part sizes on the truck instead of ordering and making a second trip.
At Carver Gate Repair Houston, the number you’re quoted is the number you pay. That’s not a marketing line. It’s the Garrison Standard, in writing, before any work starts. If the job turns out to need more than the estimate, we stop and get your sign-off before doing anything. No surprises at the door.
What Affects Gate Parts & Welding Pricing in Houston
- Gate material and gauge. Most Houston gates are steel, but the thickness matters. A 20-gauge box store gate welds differently than a 12-gauge custom steel gate in River Oaks or Memorial. Thinner steel blows through easier when welding, which means more skill and more time. Thicker steel holds welds better, but cutting and fitting take longer.
- Houston’s humidity and corrosion. We’re in a subtropical climate. Gates that face south or sit under oak canopy in areas like The Woodlands or Clear Lake hold moisture. Surface rust turns to structural rust faster than homeowners expect. By the time a weld fails, the surrounding steel often needs grinding and reinforcement before new metal can go in. That adds labor.
- Clay soil movement and post stability. Houston’s gumbo clay expands and contracts hard through wet and dry seasons. Gate posts set without deep concrete footings shift over five to ten years. A gate that won’t latch after years of good operation is usually a post that’s moved, not hardware that’s worn. Setting a post properly means digging deep, sometimes 30 to 36 inches, and that’s a different job than a surface-level hardware swap.
- Access and gate size. A double driveway gate in Katy or Cypress takes two people and heavier equipment. A single walk gate behind a house in the Heights takes one tech and a wheelbarrow of tools. Bigger gate, more steel, more welds, more time.
- Parts availability and brand. Off-the-shelf hinges and latches from a supply house are cheap and fast. Specialty parts for older custom gates, or matching ornamental iron details, cost more and sometimes need fabrication. For motorized gates, the operator brand matters. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and the part prices between those brands vary by $50 to $300 even for similar functions.
- Timing. Spring and early summer are the busiest months in Houston for gate work. Storms, humidity, and school schedules push people to finally fix the gate that’s been dragging. Emergency calls during peak season carry a premium, and scheduling fills fast.
How to Save on Gate Parts & Welding
The cheapest way to handle gate problems in Houston is to address them before they become structural. A hinge that squeaks or a gate that drags on one corner is a $150 job if you catch it early. The same gate, ignored for two years, becomes a $600 frame repair with welding and realignment.
Here’s what actually saves you money:
- Call when you first notice the problem. A gate that’s harder to open is not going to heal. In Houston’s humidity, exposed steel at a worn hinge starts rusting within weeks.
- Get the whole gate inspected while a technician is there. Paying one trip charge is cheaper than three separate visits. If hinges are shot, the latch is probably next. If the latch is worn, the post alignment is worth checking. Bundle the work.
- Don’t DIY structural welding. Big box store hinge kits and clamp-on repairs work temporarily on light gates. They fail on steel driveway gates. A bad fix often damages the gate further, making the eventual professional repair more expensive.
- Ask for a written price before authorizing work. This is the single biggest money-saver in the trade. Moving prices at the door are common in Houston’s gate repair market. A written price protects you. We provide one on every job before work begins, written down, no verbal handshakes.
- Consider reinforcing when you repair. If a weld failed because the gate frame flexes, adding a gusset plate or diagonal brace while we’re already there costs less than a separate visit later. It’s a $50 to $100 add-on at time of repair versus a $300 to $500 job by itself.
Carver Gate Repair Houston offers free estimates on gate parts and welding work. Call (361) 320-7104 and you’ll get a live person, any hour, any day. They’ll schedule a technician who shows up in a Carver uniform, background-checked, with the right parts on the truck.
Gate Parts: What Typically Gets Replaced vs. Welded
Not every gate problem needs welding. Some parts are bolt-on. Knowing the difference helps you understand what you’re paying for.
Bolt-on parts (no welding needed)
- Gate hinges (some types bolt through the post and frame)
- Latches, locks, and strike plates
- Cantilever gate rollers and track brackets
- Gate stops and drop rods
- Handle sets
These jobs run $60 to $300 typically, depending on the part and whether it’s a stock item or something specific to an older gate.
Welded parts (require on-site welding or fabrication)
- Gate frame corner joints
- Hinge weld plates and pin brackets
- Broken pickets and scroll work
- Structural reinforcement gussets
- Post caps and finials
- Custom gate extensions or height additions
These run $150 to $700 and up, because they involve cutting, fitting, welding, grinding, and finishing. Welding is not a quick patch. It’s rebuilding the mechanical connection that holds the gate together.
What The Garrison Standard Means for Your Gate Repair
Carver Gate Repair is part of the Garrison Partners family, operating to the Garrison Standard since 2008. That standard is not a vague promise. It’s a set of rules our technicians work under, and they’re posted on the wall at every shop.
Here’s what it looks like on a gate parts and welding job in Houston:
- Written price before work starts. The number does not move at the door. If we find something else during the job, we stop and get your approval in writing before touching it.
- Background-checked, uniformed technicians on every call. You know who is coming through the gate before they arrive. Our techs carry Carver ID and drive marked vehicles.
- 365-Day Done Right Promise. Every repair carries a written guarantee good for a full year from the date of service. If the repair fails inside that window, we come back and fix it. No charge, no argument.
- Free second visit if the repair fails within the guarantee window. That’s the Garrison Code in practice. We stand behind the weld, the part, and the workmanship.
- Live-person phone coverage 24 hours a day, 7 days a week. No voicemail boxes. No call-back queues. Holidays included. Call (361) 320-7104 at 2 a.m. and a person answers.
Lonnie Burke runs the crew here. He’s the one who trains every technician on what the Garrison Standard means on the ground: show up squared away, write the price down, do the work right, clean the site up, and back the repair for a year.
If you’re already planning to fix a gate, read about our Gate Parts & Welding in Houston service details, or start at the home page to see the full scope of what we handle.
Why Houston Gates Fail: Local Conditions That Affect Your Repair Cost
Every city has its own way of breaking gates. Houston has three: humidity, clay, and storms.
Humidity and salt air. The closer you get to Galveston Bay, the more salt is in the air. Neighborhoods like Clear Lake, League City, Seabrook, and La Porte have measurably faster corrosion on steel gates than, say, Cypress or Tomball further inland. Galvanized and powder-coated steel holds up, but once the coating is scratched at a weld point or a hinge, the steel underneath starts rusting quickly.
Clay soil movement. Houston’s soil is dominated by expansive clay. It swells when wet and shrinks when dry. That movement works gate posts loose over time, even in well-built installations. In neighborhoods like Pearland, Sugar Land, and Missouri City where soil composition is heavier clay, post movement is particularly common. The fix is usually deeper footings and sometimes a concrete collar around the post base.
Storm damage. A strong thunderstorm or the outer bands of a hurricane will bend a gate that was never reinforced for wind load. We get a wave of calls after every major storm season from homeowners whose gates are dragging, latches are misaligned, or welds have cracked at the hinge points. Wind loading is a real structural consideration for double driveway gates, especially the solid-panel style popular in newer developments.
Can You Come Today? Emergency Gate Welding in Houston
Yes, in most cases. Carver Gate Repair Houston keeps welding equipment on the trucks, and our techs carry the common steel stock, hinges, and hardware needed for same-day repairs across Houston. We cover the metro from Katy to Baytown, from The Woodlands down to Pearland and everything inside the Beltway.
A gate that won’t close is a security and safety issue. A broken weld on a driveway gate can leave a 400-pound gate hanging on one hinge, and if it lets go while someone is walking past, it’s a serious hazard. And a gate that swings free in the wind can do more damage to itself and the fence than the original repair would have cost.
If your gate is failed open, won’t latch, or a weld has cracked, don’t try to force it. Getting a trained professional out is faster and cheaper than a hospital bill. Call (361) 320-7104 and tell the dispatcher what’s wrong. We’ll get a tech dispatched with a real arrival window.
FAQs – Gate Parts & Welding Cost
How much does it cost to weld a broken gate hinge in Houston?
Welding a broken gate hinge in Houston runs $150 to $350 in 2026, including grinding out the old weld, welding the new hinge plate in place, and a paint touch-up on the repaired area. If the post itself is compromised, add $200 to $400 for post reinforcement or replacement. Call (361) 320-7104 for a written estimate before any work begins.
How much does it cost to replace a driveway gate post in Houston?
Replacing a steel driveway gate post in Houston costs $400 to $900 for a standard 4×4 or 6×6 post set in concrete, including removing the old post, digging a deeper footing (usually 30 to 36 inches), setting the new post, and welding the gate back onto it. Taller or custom posts push toward $1,200. The price includes concrete and cleanup.
Is it cheaper to repair a gate or replace it?
Repair is usually cheaper, with most Houston gate repairs running $275 to $650 versus $3,000 to $8,000 for a new custom double driveway gate. You should consider replacement when the frame has rusted through in multiple locations, the gate is more than 20 years old, or repair costs would exceed 50% of replacement cost. A straight answer on that requires seeing the gate, which is why we give written estimates in person.
How much does custom gate fabrication cost in Houston?
Custom gate fabrication in Houston starts around $800 for a simple single walk gate and runs from $3,000 to $8,000 for a double driveway swing gate in steel, depending on size, ornamentation, and whether it includes powder coating. Custom fabrication includes design, steel, welding, primer, paint, and installation. Each job gets a written price before fabrication begins.
Can a technician weld my gate the same day I call?
In most cases, yes. Carver Gate Repair Houston keeps welding equipment and common Houston gate hardware on the truck, and same-day service is available across the metro. Emergency calls, especially after storms or in spring peak season, can fill up, but a gate that won’t close is treated as a priority. Call (361) 320-7104 and a live person will give you the soonest real arrival window.
Pricing reflects the Houston market as of 2026. Carver Gate Repair Houston offers free estimates – call (361) 320-7104.
What Our Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.