Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Four Corners, TX
Gate repair in Four Corners typically runs $180 to $340 for most mechanical fixes, while motor replacement can reach $1,100 depending on the operator and arm configuration. Carver Gate Repair serves Four Corners as the gate specialist under The Garrison Standard: a written price before any work starts, background-checked technicians, and a written guarantee on every repair, good for a full year. Call (361) 320-7104 and a live person answers, any hour, any day.
Why Four Corners Homes Are Different
Four Corners sits on expansive clay soil that swells during wet spells and shrinks through dry stretches. That movement doesn’t just crack sidewalks; it shifts gate posts enough to knock swing and slide gates out of alignment. After a dry spell followed by heavy rain, we regularly see automated gates in Sienna and Riverstone bind or refuse to close because the posts have moved in the gumbo clay, tripping the safety reverse or pushing the limit switches out of calibration. Gulf Coast humidity piles on: hinges corrode faster, circuit boards fail from moisture exposure, and battery backups degrade between storm seasons. Homes here were mostly built from the 2000s forward, which means the gate hardware on most properties is relatively new. The work is less about rebuilding rusted iron and more about keeping recently installed openers, keypads, and safety sensors functioning through constant construction, soil movement, and summer heat that strains motors and melts plastic components. HOA-mandated fencing in subdivisions like Sienna, Riverstone, and Harvest Green means many homeowners don’t have discretion over gate style or height, so repairs have to match what the HOA already approved. The terrain is flat but the soil is active, and that combination shapes almost every gate job we handle in Four Corners.
Styles & brands we work with
Our Main Four Corners Services
Four Corners homeowners call us most about two things: a gate that won’t open or close properly, and a motor that has stopped responding altogether. Repair, installation, and motor work each get their own focused service page so you can go straight to what applies.
Gate Repair in Four Corners
Most repair calls in Four Corners trace back to one of three issues: a misaligned post from clay soil movement, a limit switch thrown off by heat or humidity, or a hinge that has corroded enough to drag the gate. Our technicians arrive with the common parts already on the truck, so many jobs are finished in one visit. Learn what a repair includes, what it costs, and what we check before quoting a price on the Gate Repair in Four Corners page.
Gate Installation in Four Corners
New gate installations in Four Corners often mean working around HOA design rules and soil that will move the post within the first year unless the footing is set correctly. We quote a written price for the full job: materials, concrete, hardware, and operator wiring if you’re adding automation. See what a complete installation covers and how we handle HOA-style gates here: Gate Installation in Four Corners.
Gate Motor Repair in Four Corners
Humidity is hard on motor internals in Four Corners, and summer heat pushes operators harder than the manufacturer intended. When a LiftMaster, BFT, or FAAC operator stops responding or grinds without moving, we diagnose the control board, limit switches, and drive assembly before writing a price. Get the details on motor repair turnaround and parts availability at Gate Motor Repair in Four Corners.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Four Corners
Our Four Corners crew works on LiftMaster, FAAC, BFT, and Linear operators, plus Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Control boards, keypads, and safety sensors for the most common local brands are stocked on the truck, which shortens turnaround for most motor repairs. See the full manufacturer list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Four Corners, TX
| Service | Typical range in Four Corners |
|---|---|
| Gate repair, mechanical (misalignment, hinges, welding) | $180 – $340 |
| Gate operator / motor replacement | $750 – $1,100 |
| Limit switch replacement or adjustment | $120 – $220 |
| Keypad replacement | $160 – $310 |
| Safety sensor replacement or realignment | $110 – $200 |
| Hinge replacement (each) | $90 – $180 |
| Post realignment (without concrete work) | $150 – $280 |
| Battery backup replacement | $130 – $260 |
Clay soil movement is the main thing that pushes prices up in Four Corners; a post that has shifted enough to need re-setting costs more than a simple hinge swap. High humidity also means corrosion repairs take longer than they do in drier climates. Every quote is written and agreed before any work starts, and the figure on that quote is the figure on the invoice.
Neighborhoods We Serve in Four Corners
We cover the full Four Corners area and the master-planned communities around it. Most calls get a same-day visit when the issue is an urgent gate failure, because our crews are already working these streets throughout the week.
- Sienna
- Riverstone
- Harvest Green
- Canyon Gate at Riverstone
- Residents of Four Corners proper
Service Area – Cities Near Four Corners
Four Corners sits at the edge of a large service region, and we regularly route technicians to nearby municipalities. If your gate is on the line between towns, we cover Houston, TX, Pearland, TX, Baytown, TX, and Humble, TX under the same Garrison Standard.
Serving Four Corners, TX - Our Local Coverage Area
We’re based in the Four Corners area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Four Corners
For urgent failures like a gate stuck open or a motor that won’t respond, we typically dispatch same-day within Four Corners because our crews already work these neighborhoods. Call (361) 320-7104 and a live person will schedule the visit, day or night.
Many subdivisions here, including Sienna and Riverstone, have HOA-mandated fencing and gate standards. Repairs that match existing hardware usually don’t need filing, but new installations often do. A technician can tell you what typically applies to your community before you sign anything.
Yes. We serve the surrounding communities and nearby cities including Houston, Pearland, Baytown, and Humble. If you’re on the edge of the service area, call and we’ll confirm coverage by address.
Written price before work starts. Background-checked, uniformed technicians. A written guarantee on every repair. Call (361) 320-7104 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Four Corners Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.