Linear Hinge & Roller Replacement Nationwide

Linear Hinge & Roller Replacement: The Houston Owner’s Guide

We stock and install Linear-compatible hinge and roller replacements across Houston, with most residential jobs priced between $140 and $340 installed, depending on the gate’s size and how many hinges or rollers failed. In most cases we can get a Houston job done same-day or next-day, because we keep the common Linear sizes on the truck. What owners usually notice first is a gate that drags, sags toward the latch side, or makes a metallic grinding sound on the track. By the time you hear it, the roller or hinge has already worn past the point where lubrication would help. The part is finished, and the fix is replacement, not adjustment.

Call (361) 320-7104

Carver Gate Repair Houston is an independent service provider. We are not affiliated with Linear, but we work on Linear systems every week and match parts to the specific model you own, not whatever is closest on the shelf.

Which Linear Models This Applies To

Linear makes slide gates and swing gates, and the hinge and roller needs differ by type. For Linear slide gates, the rollers are the wearing part: steel or nylon wheels that ride a V-track or flat rail, usually 2-inch to 4-inch diameter depending on gate weight. If you have a Linear SL, SLD, or similar slide operator, the gate itself may be a chain-driven or rack-driven frame, and the rollers sit in trucks bolted to the gate’s bottom rail. The critical measurement is the roller’s outside diameter plus the width of the wheel face, because a roller that fits the track but is too narrow will wander and wear the rail unevenly. For Linear swing gates, the hinges carry the entire weight, and oversized ornamental gates often use adjustable weld-on or bolt-on hinges with greaseable pins. We see a lot of failing hinges on Linear swing installations that were originally spec’d too light for the gate’s actual weight, which is common in Houston subdivisions where developers upgraded the gate but not the hardware.

When we match parts, we check two things before ordering anything: the model number on the operator (that tells us the system), and the physical measurements of the failed part (that tells us the fit). For hinges, you want the pin diameter, the leaf length and width, and the hole pattern. For rollers, outside diameter and face width. On the OEM-versus-aftermarket question for Linear specifically: Linear’s brand-label hardware is solid, but the aftermarket options from companies like Hillman or National Hardware often meet or exceed the original spec for half the price. Lonnie Burke’s rule on this: if the aftermarket part matches the load rating and dimensions, we use it and stand behind it under the same full-year guarantee. The part number matters less than the fit and the grade of steel.

Signs Your Linear Hinge & Roller Replacement Is Failing

• The gate sags toward the latch side and scrapes the ground. This is almost always a worn hinge pin or an elongated hinge barrel. The gate’s weight is no longer carried evenly, and the free corner drops first. On a slide gate, the same sag points to a collapsed roller or a bent roller bracket
• You hear metal grinding or a rhythmic squeak when the gate moves. A roller with a flat-spotted wheel or a seized bearing will drag instead of roll. The noise follows the wheel’s rotation, so it has a repeating pattern. Grease quiets it for a day, then it returns.
• The gate shudders or jerks partway through its travel. This is typically a roller that is intermittently binding, usually from a bearing that has rusted after years of Houston humidity and rain. The operator is pushing against a part that is fighting back, which also shortens the operator’s life.
• You see visible wear lines or a groove in the roller wheel. Nylon rollers are quieter but wear faster than steel, especially on gates that cycle more than 20 times a day. Once the wheel face grooves, it tracks poorly and accelerates wear on the rail.
• The hinge pin has play: you can lift the gate an inch or more at the free end. Pin wear in Linear swing hinges is easy to check by hand when the gate is closed. If there is vertical movement, the pin or the barrel has opened up, and the gate is putting side load on the operator arm every cycle.

Replacement Cost & What’s Included

Here is the straight pricing picture for Houston:

• Slide gate roller replacement: $140 to $220 installed, including the new rollers and adjusting the gate to run true on the track. Higher end covers heavier gates that need the gate lifted or the rail re-secured.
• Swing gate hinge replacement (single hinge, typical): $160 to $280 installed. Includes removing the old hinge, welding or bolting the new one, and re-hanging the gate so it closes square.
• Full hinge set (3 hinges) on a large ornamental swing gate: $300 to $450 installed. This is the job where the gate comes off, gets blocked up, and every hinge is replaced and aligned as a set.
• Roller plus hinge combo (common on older Linear slide gates that sag and bind): $260 to $380 installed.

Every price is written before work starts. No number moves at the door, ever. The quote includes the parts, the labor, and the cleanup. And every repair carries our written 365-day guarantee: if the hinge or roller fails within a year, we come back and fix it at no charge. That is not a courtesy. It is the Garrison Standard, and it is printed on the paperwork you sign before we touch the gate.

DIY or Call Us?

Here is the honest split. What a Houston owner can safely check: the visible wear on rollers, the play in hinge pins, the condition of bolts and brackets, and whether the gate has shifted on its mounts. Those checks do not require tools beyond a flashlight and two hands. What a homeowner should not attempt: replacing a hinge on a gate that weighs more than 300 pounds, because a swing gate under tension can shift suddenly when a hinge breaks free, and a falling gate can crush whatever is under it. A slide gate resting on failed rollers is not stable either, and the wrong jack placement turns a 30-minute job into an afternoon with a bent track. We use chain hoists and support stands for this work, and we reset the gate’s travel limits on the operator when we are done.

If you can see it and describe it, we can quote it over the phone. If you would rather have eyes on it first, we will send a background-checked, uniformed technician to measure the failed part and hand you a written price before any work starts. Call (361) 320-7104.

FAQs

Call Carver Gate Repair Houston

If your Linear gate is sagging, grinding, or dragging, call (361) 320-7104. A live person answers, 24 hours a day, every day of the year. We will talk through the symptoms, tell you what we think is wrong, and give you a straight answer on cost. If you want a technician out, we will send someone background-checked and uniformed, with the parts to fix most Linear hinge and roller failures on the first visit. The price is written before the work starts. The repair is guaranteed for a full year. That is how we run every job in Houston.

Written by Lonnie Burke, Owner, Carver Gate Repair Houston at Carver Gate Repair Houston, serving Houston and nearby areas.