Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Pearland
Gate installation in Pearland typically runs $1,600 – $7,800 depending on gate type, automation, and site conditions. Most installations are quoted and scheduled within a few days, and our techs work in Pearland neighborhoods every week. If you’re in Shadow Creek Ranch, Silverlake, or anywhere else in the city, call (361) 320-7104 for a free measure and written price. We do not charge to come out and look at the job, and the number we quote is the number you pay.
What separates a good install from a bad one in Pearland isn’t the gate itself. It’s the preparation under it. Most builder-installed gates in this city were put in as afterthoughts: undersized posts, no conduit running power to the opener location, and no accounting for what the clay soil does after a wet winter. We handle that part properly, because a bolt-on install over bad footings fails fast here.
Take a job we did in Shadow Creek Ranch after a January rain pattern soaked the neighborhood. A homeowner’s fairly new LiftMaster swing gate operator kept throwing error codes. The gate panel was fine. The operator was fine. The hinge post had shifted a quarter inch in the clay soil, and the rack and pinion was binding. We reset the post footing, re-plumbed the hinge post, and added a safety photocell before re-engaging the operator. It has cycled cleanly through every storm since. That’s the difference between fixing a symptom and fixing what Pearland’s soil actually does to a gate.
Why Carver Gate Repair Houston Is Pearland’s Preferred Gate Installation Company
Pearland homeowners call us because the crew shows up when we say we will, and the price is written down before work begins. That format is uncommon in gate work. Lonnie Burke runs Gate Installation for Carver Gate Repair Houston under the same Garrison Standard that has governed this company since 2008: background-checked, uniformed technicians, a written price before any work starts, and a full-year written guarantee on every repair. If the repair fails inside that year, we return and fix it at no charge. That second visit is free. It is in writing.
We work on nine gate motor brands, including BFT, Linear, Viking, and Ghost Controls. That matters in Pearland because this city has a mix of builder-grade operators, older chain-drive systems, and newer smart-capable motors. A crew that only knows one brand ends up selling you a replacement you may not need. We match the repair to what is already on your posts.
Our dispatch is coordinated from the brand’s Houston office, and Pearland is covered by local crews who know the neighborhoods. When you call, a live person answers. Every time. No voicemail queue, no call back on Monday. That phone is staffed 24/7, including weekends and holidays, at (361) 320-7104.
Styles & brands we work with
Gate Installation Services in Pearland
Gate Installation Services in Pearland covers new driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. A new install here usually means one of three situations: a house that never had a gate and the homeowner wants one, a builder-grade gate that has sagged or rusted and needs replacing, or a manual gate the owner wants automated. Each path requires different preparation, and the preparation is where most Pearland installs go wrong.
Driveway and Security Gates
Driveway gates in Pearland run heavier than people expect. Ornamental steel and iron panels sized for a 16 to 20-foot opening can weigh 400 to 800 pounds. The operator has to be sized for the panel weight and the cycle count it will see. In Shadow Creek Ranch and Silverlake, HOAs also have design requirements: material, color, and often the direction the gate swings. We work inside those rules every week.
Pedestrian and Double Gates
Pedestrian gate installs in Pearland typically fall between $1,600 and $3,400, depending on whether it is steel, aluminum, or wood, and whether it includes a keypad or intercom. Double gates are the more involved end of the range: two leaf panels, a central drop rod, and an opener with enough capacity for both panels cycling together. If you’re replacing a failed double gate, we usually recommend reusing the existing posts only if they test straight. In Pearland’s clay, they often don’t.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Pearland
Electric Gate Installation in Pearland is the service we field the most calls about, and it usually breaks into two jobs: the operator and the infrastructure. The operator is the motor and control board. The infrastructure is the conduit, wire gauge, grounding, loop detector, photocells, and post condition. Most Pearland homes built in the 1990s, 2000s, and 2010s do not have conduit run from the house or garage to the gate location. The builder never planned for automation, so the homeowner has a manual gate with no way to power it.
Retrofit Automation for Manual Gates
Adding an operator to a manual gate in Pearland ranges from $2,200 to $5,500 depending on the length of the power run, whether trenching is required, and whether the posts need reinforcement. We handle the trenching, the conduit, the wire pull, and the post work as part of the install. The gate ends up wired inside conduit, not with surface-mounted Romex stapled to a fence board. In this humidity, surface wiring corrodes. Conduit does not.
New Operators and Smart Controls
We install and configure operators from BFT, Linear, Viking, and Ghost Controls, among others. If you want smartphone control, keypad entry, or integration with an existing camera system, we set that up at install so it works from day one. The written quote includes the operator, controls, safety edges, and the electrical run. Nothing gets added at the door.
Trusted Brands We Service in Pearland
Pearland homes carry a wide spread of openers: BFT and Viking on higher-end estate gates, Linear and Ghost Controls on mid-range residential installs. We service all of them, and our techs carry the common parts for those brands on the truck. That means a failed control board on a BFT in Silverlake does not require a second trip across Houston to pull a part. We keep local stock and have fast turnaround for Pearland customers because our crews are in this city so often.
When we install a new operator, we recommend the brand and model based on gate weight, panel material, and expected cycle count. A heavy steel double gate on a busy driveway needs a different operator than a light aluminum pedestrian gate that cycles twice a day. We match the motor to the actual load, not to what is left on a shelf.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Pearland Homes
- Undersized builder-grade operators. Tract builders install operators sized for the cheapest bid, not for the gate panel they hung. In new Pearland developments, a heavy steel gate on an undersized motor stalls, overheats, and burns the control board. We size the replacement based on actual panel weight and duty cycle.
- Missing conduit runs. Most Pearland homes built before the mid-2010s do not have conduit from the house to the gate. That forces surface-mounted wiring, which corrodes in this humidity. During a retrofit automation, we run proper conduit underground so the electrical is protected.
- Clay-shifted gate posts. Pearland sits on clay-rich soil. After heavy rains, the soil expands and contracts, and gate posts move. A post that was plumb in August can be a quarter inch out by February, and that throws off the rack and pinion, causing the motor to bind. We check post plumb before we mount an operator, and we reinforce footings when they are undersized.
- HOA design conflicts. Communities like Shadow Creek Ranch and Silverlake require gates to match existing brick, stone, or specific colors and styles. A homeowner can buy a gate, have it installed, and then get a violation letter because it does not match community design rules. We install to the HOA standards from the start, and we know what most Pearland communities expect.
Pricing for Gate Installation in Pearland, TX
Here are the ranges Pearland homeowners should plan around:
- Pedestrian gate installation: $1,600 – $3,400
- Driveway gate installation (single swing): $2,400 – $4,800
- Driveway gate installation (double swing or slide): $3,800 – $7,800
- Electric gate installation with new operator: $2,800 – $5,800
- Retrofit automation on existing manual gate: $2,200 – $5,500, depending on power run and post condition
What moves the number is the length of the electrical run, the gate weight, whether the posts need footing repair, and the operator brand and capacity. We give a written price before any work starts, and the number does not change at the door. If the job is more involved than the quote describes, we stop and talk to you first. No surprise invoices. For an exact quote, call (361) 320-7104. Estimates are free.
We Also Serve Cities Near Pearland
Our crews also run Gate Installation in Pearland neighboring markets, including Deer Park, Bacliff, Houston, and Channelview. If you are close to the Pearland line and not sure whether we cover your street, call (361) 320-7104 and we will tell you straight.
Serving Pearland, TX - Our Local Coverage Area
We’re based in the Pearland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Pearland
Yes, in most cases. A loop detector senses a vehicle on the driveway and tells the gate to hold open or reverse. Without one, the gate can close on a car or fail to open when you pull up. We install loop detectors as standard on driveway gate automation, and they are included in our quotes for vehicle gates. If your driveway has decorative pavers or stamped concrete, we plan the loop placement carefully so the saw cut is clean. Call (361) 320-7104 and we will spec it for your layout.
Yes. That is one of the most common jobs we do in Pearland, because most builder-installed manual gates have no conduit run. We trench from the power source to the gate, run new conduit underground, pull the wire, and mount the operator with the proper grounding. The price range is $2,200 – $5,500 depending on the distance and whether the posts need reinforcement. We quote the whole thing in writing before the shovel goes in the ground.
Pearland’s clay soil expands and contracts with moisture, and that shifts gate posts out of plumb over time. If we’re installing a new gate, we set posts deeper than the minimum and use proper concrete footings sized for the panel and the operator load. If we’re automating an existing gate, we check post plumb first and correct the footing if it has moved. Installing a motor on a post that is already leaning just transfers the strain into the operator.
On narrow or shallow lots, a slide gate is usually the better choice. A swing gate needs room to arc inward or outward, and a short driveway often does not have that clearance, especially with a parked car near the gate. Slide gates run on a track and stay parallel to the fence line. We will tell you which one fits your lot during the free measure, and the written quote will reflect whichever is right. Call (361) 320-7104 to schedule it.
Yes. Many Pearland HOAs, including in Shadow Creek Ranch and Silverlake, require gates to match the home’s brick, stone, or specific color palette and material. We work with the design rules from the start: we match the finish, the swing direction, and the overall look, then install to those standards so you do not get a violation letter after the fact. Bring your HOA’s design guidelines to the free measure and we will spec the gate correctly the first time.
For a free measure and written estimate, call (361) 320-7104. A live person answers, every time. We will come out, look at the gate and the site, and give you a price on paper that does not move.
Written by Lonnie Burke, Owner at Carver Gate Repair Houston, serving Pearland to The Garrison Standard.