Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Humble
Gate installation in Humble, TX typically runs $2,800 to $9,500 depending on the gate type, material, and operator, and most jobs are completed within one to three days once materials arrive. Our crews work throughout Humble weekly, from Fall Creek to Atascocita North to the older subdivisions off FM 1960. We know this city’s soil, its flood zones, and the specific ways its climate punishes substandard gate work. If you need a driveway gate that won’t sag in two years, call us at (361) 320-7104 for a free on-site estimate.
Every Gate Installation job we take on starts the same way: a technician walks the property, takes measurements, checks the soil at the post locations, and writes a firm price before any work begins. That written price doesn’t move at the door. Lonnie Burke set that standard years ago, and every crew that works under his name holds to it.
Why Carver Gate Repair Houston Is Humble’s Preferred Gate Installation Company
Humble homeowners call us because they’ve already dealt with the alternative. A general contractor quotes a gate job, subcontracts it out, and the warranty evaporates the first time the gate binds. We don’t operate that way. Gates are the only thing we do, and we’ve done them since 2008 under the Garrison Standard: written prices, background-checked technicians, and a 365-day written guarantee on every repair and installation.
Our technicians arrive at Humble properties in uniform, introduce themselves by name, and explain exactly what they’re doing before they start doing it. The work area gets cleaned up at the end of the day. No scrap metal left in the driveway. No half-finished posts. Lonnie Burke insists that a gate job isn’t done until the site looks like we were never there except for the gate that works.
We also answer our phones. A live person picks up at (361) 320-7104, 24 hours a day, every day including holidays. When a Humble homeowner has a gate emergency at 2 a.m. during a thunderstorm, they reach a dispatcher who can actually send someone, not a voicemail box.
Response time to Humble varies by neighborhood and time of day, but most non-emergency installation estimates are scheduled within 48 to 72 hours. Emergency repair calls, particularly after storms, get prioritized as slots open.
Styles & brands we work with
Driveway Gate Installation in Humble
Driveway Gate Installation in Humble usually means one of two things: a swing gate on hinges, or a sliding gate on a track. Swing gates dominate the older subdivisions where driveways are wide but relatively short. Sliding gates fit the long, narrow flag-lot approaches common in Fall Creek and parts of Atascocita. On a typical Humble driveway gate install, expect to pay $3,200 to $7,800 for a steel or ornamental iron gate with an automatic opener, keypad, and safety photocells.
Custom Ornamental Iron Swing Gates
In Humble’s established neighborhoods along FM 1960 and around Deerbrook Mall, ornamental iron swing gates are the style most homeowners want. These gates weigh anywhere from 300 to 800 pounds per leaf, which means the hinge posts carry serious load. Around here, we set those posts in concrete footings at least 4 feet deep, because anything shallower moves when the gumbo clay swells. A custom ornamental swing gate in Humble runs $4,200 to $8,900 installed with operator, columns, and entry hardware.
Flag-Lot Driveway Solutions
Humble has a lot of flag lots. Long driveway approaches that squeeze between two side yards before opening to a set-back home. A standard swing gate won’t work on most of them because there’s no room for the gate leaf to arc. We install dual-track sliding gates, or single-leaf cantilever slide gates, on those properties. The gate rides on a steel track set in concrete, and the operator mounts at the end of the run.
Sliding Gate Installation in Humble
Sliding Gate Installation in Humble is the default choice for long driveways, commercial properties, and homes with strict setback requirements from the road. A sliding gate moves horizontally along a track instead of swinging into the driveway, so it works where there’s no room for a swing arc. A steel sliding gate with an automatic operator in Humble typically costs $3,500 to $8,200 installed, depending on the gate length, the operator type, and whether we’re tying it into an intercom or camera entry system.
Track Systems Built for Clay Soil
The track is the weak point on any sliding gate, and in Humble it’s especially vulnerable. Gumbo clay expands when wet and contracts in drought, and that movement cracks poorly poured track foundations. We pour a continuous concrete track base with rebar reinforcement, set the track rail in a bed of grout, and use sealed roller bearings that don’t bind when dust and clay particles get into the track channel. If the track moves, the gate binds. If the gate binds, the operator burns out. The footing is the job.
Operator Selection for Humble’s Humidity
We recommend AC-powered linear operators for most Humble sliding gates, particularly on long runs where the gate leaf exceeds 500 pounds. LiftMaster and FAAC both make sliding operators that hold up to humid coastal air and frequent cycling. Battery backup is worth adding in Humble, because storm-driven power outages are common, and nobody wants to be locked out of their own driveway when the power is out.
Trusted Brands We Service in Humble
Every gate motor we install in Humble is a brand we can service with parts on the truck or within one local parts run. We train on LiftMaster, FAAC, BFT, and Linear equipment, and we stock control boards, limit switches, safety photocells, remote transmitters, and backup batteries for these systems at all times. When a Humble customer calls with a failed swing arm on their FAAC operator, we don’t tell them to wait two weeks for a part. We get it done, under warranty, with a written guarantee on the repair.
Common Gate Installation Problems We See in Humble Homes
- Posts out of plumb after heavy rain. Humble’s gumbo clay swells dramatically when saturated, and shallow post footings get pushed sideways. A gate that was perfectly level in March can be binding by June. We over-excavate post holes and pour concrete footings 4 feet deep or deeper on every install.
- Fried operator control boards after lightning. Humble sits in a lightning corridor. Storm season brings near-daily electrical activity, and a direct or even nearby strike can send a surge through the gate’s power supply and destroy the circuit board. We install surge suppression at the operator and recommend it on every job, because the repair without it is $300 to $600 per board, and the boards fail at the worst possible time.
- Rust on ornamental gates and hardware. Humble’s humidity is relentless, and it’s worse near the creek bottoms and drainage channels. Bare steel rusts fast. We specify powder-coated ornamental iron and stainless steel hinges, rack mounts, and photocell brackets on every custom gate. Paint-only finishes are cheaper up front and cost more within three years.
- Undersized operators on heavy gates. A big custom iron gate needs an operator rated for its weight and cycle frequency. Some Humble homeowners buy a cheap swing opener rated for 400 pounds and hang it on a 700-pound gate. The motor strains, the limit switch fails, and the gate eventually stops mid-cycle. We size the operator to the gate plus a 30 percent margin, so the system isn’t running at its limit every time it opens.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Humble, TX
A basic single-leaf chain-link or light steel walk gate in Humble starts around $1,200 to $1,800. A custom ornamental iron driveway swing gate with an automatic operator runs $4,200 to $8,900, and a sliding gate on a flag lot usually falls between $3,500 and $8,200. Security gates with intercom, camera, and access control integration can push past $9,500, especially on larger properties with masonry columns and long conduit runs. The price you’re quoted in writing is the price you pay. No changes happen unless we walk you through the reason and get your signature first. Call (361) 320-7104 for a free estimate in Humble.
| Gate Type | Typical Range in Humble | Notes |
|---|---|---|
| Basic steel walk gate | $1,200 – $1,800 | No automatic operator |
| Automatic driveway swing gate | $3,200 – $7,800 | Steel or aluminum, with operator |
| Custom ornamental iron swing gate | $4,200 – $8,900 | Powder-coated, decorative, with entry system |
| Sliding gate on flag lot | $3,500 – $8,200 | Track, operator, safety edges |
| Full security gate package | $6,500 – $12,000+ | Intercom, camera, access control, masonry columns |
We Also Serve Cities Near Humble
Beyond Humble, our crews cover Houston, Channelview, Highlands, and Deer Park for gate installation and repair. If you’re in a neighboring community and need a written estimate, call the same number: (361) 320-7104.
Serving Humble, TX - Our Local Coverage Area
We’re based in the Humble area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Humble
Humble sits on expansive gumbo clay that swells when it gets wet and shrinks when it dries, and the swing in volume moves anything set shallowly in the ground. Houston neighborhoods with sandier or more compacted soils don’t see the same degree of seasonal movement. We set post footings deeper and wider in Humble, typically 4 feet or more, with rebar reinforcement to resist the lateral pressure. A correctly set post should stay plumb through multiple wet-dry cycles. Call (361) 320-7104 if you’re seeing gaps open around your existing gate posts.
Lightning can induce electrical surges through the gate’s AC power line, which fries the control board and leaves the operator dead. In Humble, where thunderstorms roll through on a weekly basis from spring into fall, unprotected gate openers fail at a much higher rate. We install surge suppression at the operator on every new installation and recommend a whole-panel surge device where the gate shares a circuit with other outdoor equipment. The surge unit is a small add-on that protects a $400 control board. Call (361) 320-7104 for a quote on a surge-protected install.
A linear arm or rack-and-pinion sliding operator works best on a long Fall Creek flag-lot driveway because the gate leaf travels horizontally along a track, which is the most stable setup for runs over 25 feet. Swing gates are usually impractical on flag lots due to the side yard pinch points. We recommend LiftMaster or BFT linear operators for these applications, sized with at least a 30 percent weight margin over the gate. Call (361) 320-7104 and we’ll measure the run and write a firm price.
Humble’s humidity rarely drops below 60 percent, and the near-daily summer thunderstorms keep metal surfaces wet for hours at a time. Bare steel and cheap paint finishes oxidize quickly under those conditions, especially at welds, hinge points, and any place water pools and sits. We specify powder-coated ornamental iron and stainless steel fasteners and hardware on every custom gate we install in Humble. The coating costs more up front and saves a full refinishing job within the first few years. Call (361) 320-7104 to discuss finishes and materials.
Solar gate openers work in Humble for light-use gates far from an AC power source, but they’re not the right choice for a heavy custom iron gate or a gate that cycles many times per day. Humble’s frequent cloud cover during storm season reduces solar panel output, and battery capacity drops in the heat. For most driveway gates in Humble, we recommend a hard-wired AC operator with battery backup. It’s more reliable, handles heavier gates, and won’t go dead after three cloudy days. Call (361) 320-7104 and we’ll tell you honestly whether solar fits your gate or whether AC is the better call.
Call Carver Gate Repair Houston for Gate Installation in Humble
If you live in Humble and you’re planning a gate installation, start with a written estimate from a crew that knows this city’s soil, storms, and housing stock. We’ll send a technician to your property, take measurements, check the soil conditions, and write a firm price on the spot. No numbers that move later. No surprises at the end of the job. Just a gate that works, a clean site, and a written guarantee for a full year. Call (361) 320-7104 today to schedule your free estimate.
Written by Lonnie Burke, Owner at Carver Gate Repair Houston, operating to the Garrison Standard since 2008.