Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Nassau Bay, TX
Carver Gate Repair handles gate repair, gate installation, and gate motor work across Nassau Bay, TX. Most of the homes here were built in the 1960s and 1970s, and many still have their original driveway gates, which means the work we do tends to involve corrosion repair, frame straightening, and retrofitting older gates with modern safety sensors. Salt air from Clear Lake and Galveston Bay works into hinges and chain drives faster than inland homeowners would expect. If you need a gate fixed or replaced, call (361) 320-7104 and a live person answers, day or night.
Why Nassau Bay Homes Are Different
Nassau Bay was built around NASA’s Johnson Space Center, and the housing stock reflects that era: single-family ranch and traditional homes on larger lots, with front-facing driveway gates that are now 40 to 60 years old. Two things make gate work here different from Houston or Pearland. First, the humidity and salt-laden air off Galveston Bay accelerate rust on rollers, tracks, hinges, and chain drives. A gate that would last years inland can seize up in Nassau Bay if the hardware wasn’t sealed or replaced with corrosion-resistant parts. Second, many original driveway gates were sized for single-car garages and 1960s-era sedans. Today’s SUVs and full-size trucks scrape the gate edge or hit the frame on the swing in, which is why we regularly get calls to widen openings or replace bent gate frames. Strong winds from summer thunderstorms and occasional tropical systems also loosen gate posts and knock automatic openers out of alignment. The right repair here accounts for all of that: galvanized or powder-coated hardware, sealed welds, and posts set deeper than the minimum.
Styles & brands we work with
Our Main Nassau Bay Services
The two calls we get most from Nassau Bay homeowners are for aging gate hardware that’s finally failing and for automatic openers that stop holding alignment after storms. Each service has its own Nassau Bay page linked below.
Gate Repair in Nassau Bay
A repair call in Nassau Bay usually starts with a gate that’s sagging, scraping the driveway, or refusing to latch. We see rusted hinges on the lake side of the community, bent posts from years of wind load, and frames that were never built for the gate’s current weight. We straighten or replace posts, weld cracked frames, and replace rollers and hinges with corrosion-resistant hardware. This is not a place for a quick grease-and-go; the salt air means a repair done wrong comes back in six months. Gate Repair in Nassau Bay covers what the job involves and what it typically costs.
Gate Installation in Nassau Bay
Many Nassau Bay homes are reaching the point where repair no longer makes sense on a 50-year-old gate. A new installation means measuring the existing opening, checking whether the posts are still sound, and building a gate sized for the vehicles that actually use the driveway now. We also handle widening narrow single-car openings when homeowners are tired of scraping their trucks on the gate edge. Every installation starts with a written price before any work begins. Gate Installation in Nassau Bay walks through materials, timing, and what’s included.
Gate Motor Repair in Nassau Bay
Automatic gate openers in Nassau Bay work hard in a rough environment: humidity, salt air, and heat. When an opener stops responding or a gate won’t hold its open or closed position, the fault is usually the limit switch, a damaged loop detector, or a swing operator that’s been knocked out of alignment by wind. We service LiftMaster, FAAC, BFT, and Linear systems, and we stock common parts for all of them so most motor repairs don’t require a second visit. Gate Motor Repair in Nassau Bay explains the diagnosis process and repair costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Nassau Bay
We work on LiftMaster, FAAC, BFT, and Linear gate systems, plus several other major brands. Common parts for these openers are stocked on our service vehicles, which keeps most motor repairs to a single visit. For less common parts, see our brands page for the full equipment list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Nassau Bay, TX
| Service | Typical range in Nassau Bay |
|---|---|
| Gate repair (minor) | $150 – $350 |
| Gate repair (major) | $450 – $1,200 |
| Gate installation | $2,500 – $9,000 |
| Gate opener motor replacement | $600 – $1,800 |
| Swing gate operator | $800 – $2,500 |
| Sliding gate operator | $900 – $2,800 |
| Keypad / intercom / loop detector | $300 – $900 |
| Hinge or roller replacement | $100 – $400 |
| Gate post repair or replacement | $300 – $1,000 |
| Gate frame welding or straightening | $200 – $700 |
In Nassau Bay specifically, salt-air corrosion and wind damage push repairs toward the upper end of these ranges when posts need replacing or multiple hinges have seized. You see the written price before any work starts, and that number does not move at the door. Every repair carries a written guarantee good for a full year.
Neighborhoods We Serve in Nassau Bay
We run calls throughout Nassau Bay, including the established single-family streets and the homes on larger lots where gates sit closer to the water and take more salt exposure. Our technicians typically reach Nassau Bay addresses the same day for repair calls, and we schedule installations at the homeowner’s convenience.
- Nassau Bay original townhomes and single-family streets
- Neighborhoods along NASA Parkway
- Homes near Clear Lake and the waterfront
- The ranch-style subdivisions north of Space Center Boulevard
Service Area – Cities Near Nassau Bay
Beyond Nassau Bay, our crews cover the surrounding metro for gate repair, installation, and motor work. That includes Houston, TX, Pearland, TX, Baytown, TX, and Humble, TX. If you’re not sure whether you’re in our service area, call (361) 320-7104 and we’ll tell you straight.
Serving Nassau Bay, TX - Our Local Coverage Area
We’re based in the Nassau Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Nassau Bay
Most Nassau Bay repair calls are handled same-day, and we carry parts for the major opener brands on the truck so we don’t have to leave and come back. Emergency calls are answered by a live person 24/7 at (361) 320-7104, not a voicemail queue.
That depends on your subdivision’s covenants. Some Nassau Bay homeowners associations require approval before a gate is replaced or a driveway opening is widened, especially for visible front-facing gates. We can provide measurements and material specs to support your request, but the approval itself runs through your HOA.
We schedule and dispatch installations directly for Nassau Bay addresses. Scheduling and dispatch are coordinated from our Dallas-Fort Worth office, but the technicians who do the work service Nassau Bay locally. Installed gates and operators carry the same written guarantee as every repair we do.
Call (361) 320-7104 for a free estimate on gate repair, installation, or motor work in Nassau Bay, TX. A live person picks up, and you’ll get a written price before any work starts. Written by Lonnie Burke, Owner at Carver Gate Repair, operating to The Garrison Standard since 2008.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Nassau Bay Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.